Revel Performa4 F346 is a -way Passive Floor-standing speaker by Revel. It features a 1" Hard-Dome Tweeter, x 6.5" Midrange and 3 x 6.5" Micro Ceramic Composite (MCC) Woofer. The speaker has a frequency range of 30-40k Hz and a sensitivity of 88 dB. Revel Performa4 F346 has an MSRP of 6998$ per pair but can often be found around 0$ per pair.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Revel Performa4 F346 Speaker
Revel Performa4 F346 has a Frequency response range of 30-40k Hz at ±3dB and Power Range of 20-250 watts. With a minimum frequency of 30 Hz, Revel Performa4 F346 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Revel Performa4 F346's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Among the speakers in our database with a max MSRP price of 10000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Revel Performa4 F346's 30Hz:
Impedance and Sensitivity
Revel Performa4 F346's nominal impedance level is
6 ohms and has a sensitivity of
88 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 6 Ohms makes the Revel Performa4 F346 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
88dB of the Revel Performa4 F346 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise.
Check the amplifiers that are in a similar price range to the Revel Performa4 F346:
Input Type
Revel Performa4 F346 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Revel Performa4 F346 External Dimensions and Weight
Revel Performa4 F346 has external dimensions of (Height x Width x Depth) 44-7/16inch x 14-1/8inch x 16-3/8inch (1129.0 x 359.0 x 416.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Revel Performa4 F346 is approximately 1493.4cm2 / 231.5inch2.
WeightThe Revel Performa4 F346 weighs 39.77kg / 87.5lbs per piece. Here is a comparison of how Revel Performa4 F346's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $10000
Available colors
Revel Performa4 F346 is available in Walnut.
What's in the Box of Revel Performa4 F346?
Here are the items that are included inside the box of Revel Performa4 F346:
Floorstanding loudspeaker Grille 2 Terminal jumpers (pre-installed) Four M8 Spikes 4 Nuts 4 Discs Quick Start Guide
Recommended Accessories
Here is a list of accessories that we think you may need for the Revel Performa4 F346.
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.