Q Acoustics 3010 is a 2-way Passive Bass Reflex Bookshelf speaker by Q Acoustics. It was released in 2014. It features a 1" Dome Tweeter and 1 x 4" Paper composite Woofer.
The smallest of the original 3000 range - the generation that made Q Acoustics' reputation before the 3000i replaced it.
The speaker has a frequency range of 68-22k Hz and a sensitivity of 86 dB. Q Acoustics 3010 has an MSRP of 119$ per pair.
Room Size Suitability
The size of the room where you plan to use the Q Acoustics 3010 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Q Acoustics's 3000 Series of Loudspeakers
3010 is a member of Q Acoustics's 3000 series of Passive speakers. Below you can see the main specs of these speakers.
Q Acoustics 3000 Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Q Acoustics 3010 Speaker
Q Acoustics 3010 has a Frequency response range of 68-22k Hz and Power Range of 15-75 watts. With a minimum frequency of 68 Hz, it is hard to expect a strong bass response from 3010 so depending on your use case, using a subwoofer will significantly help to widen the response range.
Here we have a comparison of how 3010's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the Q Acoustics 3010?
Crossover frequency of the Q Acoustics 3010?
The crossover frequency of the 3010 is set to 2800Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Q Acoustics 3010's nominal impedance level is
6 ohms but can go down to as low as
6 ohms, and has a sensitivity of
86 dB.
Sensitivity
Bookshelf Speakers
Nominal Impedance of the 6 Ohms makes the Q Acoustics 3010 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 86 dB, Q Acoustics 3010 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Q Acoustics 3010 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Q Acoustics 3010 need?
At normal listening levels in a medium room, about
25–75 W
per channel into 6 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $300, or every amplifier we cover.
Input Type
3010 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Q Acoustics 3010 External Dimensions and Weight
Q Acoustics 3010 has external dimensions of (Height x Width x Depth) 9-7/16 x 5-7/8 x 8-1/16inch (239.0 x 150.0 x 205.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Q Acoustics 3010 is approximately 307.5cm2 / 47.7inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Q Acoustics 3010 weighs 3.60kg / 7.9lbs per piece. Here is a comparison of how 3010's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $300
Cabinet type and Materials
Q Acoustics 3010 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Q Acoustics 3010 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Wall Mounting
3010 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Q Acoustics 3010 come with a Grille?
3010 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Q Acoustics 3010.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Product Page
Official manufacturer's product page for the Q Acoustics 3010 speaker can be found below:
Official Product Page for Q Acoustics 3010
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.