Edifier MR3 is a 2-way Powered Bass Reflex Bookshelf speaker by Edifier. It was released in October 2024. MR3's built-in amplifier provides 36-watt RMS. The built-in power amplifier saves space & eliminates the need to connect Edifier MR3 to a stereo receiver or external power amp. It features a 1" Soft-Dome Tweeter and 1 x 3.5" Woofer.
Edifier publishes 3.85 kg as the net weight of the PAIR, so the weight columns are left empty. Active speaker 185 mm deep, passive 176 mm; the row carries the active one. Hi-Res Audio certified at 24-bit/96 kHz over the wired inputs; Bluetooth 5.4 is SBC only, with multipoint for two devices. Balanced TRS but no XLR. No subwoofer output. Signal-to-noise ratio 85 dB(A).
The speaker has a frequency range of 52-40k Hz. Edifier MR3 has an MSRP of 150$ per pair.
Edifier's MR Series of Loudspeakers
MR3 is a member of Edifier's MR series of Powered speakers. Below you can see the main specs of these speakers.
See all 4 Edifier MR models compared »
Edifier MR Series Speakers
Frequency Response of the Edifier MR3 Speaker
Edifier MR3 has a Frequency response range of 52-40k Hz. With a minimum frequency of 52 Hz, MR3 will provide an average bass depth. Unfortunately, the Edifier MR3 speaker lacks a subwoofer output, making it impossible to connect a subwoofer and enhance the bass response of your system.
Here we have a comparison of how MR3's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Bluetooth Connectivity
Edifier MR3 employs Built-in 5.4 Bluetooth for wireless music streaming from your Bluetooth-enabled devices such as Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computers/laptops. MR3 can playback up to 24-bit / 96 kHz with compatible devices.
Edifier MR3 supports the following Bluetooth Codecs when used with supported devices:
App-Based Control
Edifier MR3 can be controlled wirelessly via EDIFIER ConneX application available on Apple iOS and Android.
Inputs and Outputs
- 3.5mm Minijack Input
- RCA Input
- Headphone Jack: 3.5mm
Edifier MR3 External Dimensions and Weight
Edifier MR3 has external dimensions of (Height x Width x Depth) 8.7 x 4.9 x 7.3inch (220.0 x 125.5 x 185.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Edifier MR3 is approximately 232.2cm2 / 36.0inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
Cabinet type and Materials
Edifier MR3 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Available colors
Edifier MR3 is available in Black and White.
Wall Mounting
MR3 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Recommended Accessories
Here is a list of accessories that we think you may need for the Edifier MR3.
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Product Page
Official manufacturer's product page for the Edifier MR3 speaker can be found below:
Official Product Page for Edifier MR3