DALI Kore is a 3-way Passive Bass Reflex Floor-standing speaker by DALI. It was released in 2024. It features a 1.38" Hybrid dome + planar Tweeter, 1 x 7" Midrange and 2 x 11.5" Wood fibre Woofer.
DALI publishes the driver complement as: 2 x 11½ inch / 1 x 7 inch [Balanced Drive SMC] low/mid, 1 x 35 mm soft dome, 1 x 10 x 55 mm planar high frequency.
The speaker has a frequency range of 26-34k Hz and a sensitivity of 88 dB.
DALI's Kore Series of Loudspeakers
Kore is a member of DALI's Kore series of Passive speakers. Below you can see the main specs of these speakers.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the DALI Kore Speaker
DALI Kore has a Frequency response range of 26-34k Hz at ±0.0dB and Power Range of 50-1500 watts. With a minimum frequency of 26 Hz, Kore delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Kore's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Crossover frequency of the DALI Kore?
Kore is a 3-way speaker and its crossover frequency between the woofer and the midrange set to Hz and the Crossover frequency between the midrange and the tweeter is set to Hz.
Impedance and Sensitivity
DALI Kore's nominal impedance level is
4 ohms and has a sensitivity of
88 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the DALI Kore is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the DALI Kore with an AVR but use an Integrated Amplifier instead.
Sensitivity
88dB of the DALI Kore is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise.
Browse all integrated amplifiers
Input Type
Kore features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
DALI Kore External Dimensions and Weight
DALI Kore has external dimensions of (Height x Width x Depth) .
Weight
All Floor-standing Speakers
Cabinet type and Materials
DALI Kore has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the DALI Kore come with a Grille?
Kore comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the DALI Kore.
Official Product Page
Official manufacturer's product page for the DALI Kore speaker can be found below:
Official Product Page for DALI Kore
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.