In this review, we will be comparing ES50 and ES60, two Passive Floor-standing speakers by Polk Audio Let's have a brief look at the main features
of Polk ES50 and Polk ES60 first before getting into our more
detailed comparison.
ES50 and ES60 are members of Polk Audio's Signature Elite series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk ES50 and Polk ES60 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk ES50 and Polk ES60 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ES50 and ES60 are 2-way speakers.
| Driver |
Polk ES50 |
Polk ES60 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
3 x 6.5-inch
|
ES50 features a 1" Terylene High-Res Soft-Dome Tweeter and 2 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the ES60 features a 1" Terylene High-Res Soft-Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
ES50 has a frequency range of 38-40k Hz whereas ES60 has a frequency range of 32-40k Hz. With a minimum frequency of 32Hz, the ES60 can go significantly deeper on the low side and provide stronger bass compared to the ES50's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES50 and ES60 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES50 sensitivity is rated at 88 dB and the ES60's is at 90 dB. This 2 dB difference makes the Polk ES60 a more sensitive speaker compared to Polk ES50, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
ES50 can handle a max power of 300 watts RMS from the amp the whereas ES50 has a max power handling value of 200 watts RMS , 100 watts less than the ES60.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both ES50 and ES60 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Both ES50 and ES60 have bottom firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES50's and Polk ES60's external dimensions. Polk ES50 has external dimensions of 951.0 x 191.0 x 281.0mm ( 37-7/16 x 7-1/2 x 11-1/16inch) whereas Polk ES60 has external dimensions of 1131.0 x 216.0 x 401.0mm ( 44-1/2 x 8-1/2 x 15-3/4inch) .
Polk ES60 is clearly the larger of the two speakers. Its body is 25mm wider, 180mm taller and 120mm deeper than Polk ES50.
Below you can see the front view size comparison of Polk ES50 and Polk ES60 in scale.
Comparison image of Polk ES50 and Polk ES60 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES50 is approximately 536.7cm2 / 83.2inch2 and base area of the Polk ES60 is approximately 866.2cm2 / 134.3inch2. The ES50 requires 38% less surface area than the ES60 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk ES50 weighs 14.50kg / 31.9lbs and the Polk ES60 weighs 23.60kg / 51.9lbs. This makes the ES60 63% heavier than the ES50.
Here is a comparison of how ES50 and ES60's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Polk ES50?
Here are the items that are included inside the box of ES50:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
What's in the Box of Polk ES60?
Here are the items that come with the ES60:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
 Height |
951mm
vs
1131mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
536cm2 (191x281mm)
vs
866cm2 (216x401mm)
|
Takes less floor space |
 Price per pair* |
698USD
vs
1098USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
300 watts
vs
200 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
| Number of Woofers |
3
vs
2
|
More woofers |
| Low Frequency Response |
32 Hz
vs
38 Hz
|
Generates deeper bass |
| General |
Polk Audio Signature Elite ES50 |
Polk Audio Signature Elite ES60 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
40-200 watts |
50-300 watts |
| Sensitivity |
88 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
38-40k Hz |
32-40k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
3 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
Mica-reinforced polypropylene |
Mica-reinforced polypropylene |
| Woofer Surround Material |
Butyl rubber |
Butyl rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
2500Hz |
| Firing Direction |
bottom |
bottom |
Physical Specs |
|
|
| Height |
951.0mm (37.4") |
1131.0mm (44.5") |
| Width |
191.0mm (7.5") |
216.0mm (8.5") |
| Depth |
281.0mm (11.1") |
401.0mm (15.8") |
| Weight |
14.50kg (31.9lbs) |
23.60kg (51.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF, Wood-grain vinyl |
MDF, Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |