In this review, we will be comparing two different type of speakers by Polk Audio. Polk Audio Signature Elite ES50 is a Floor-standing speaker whereas the ES35 is a Center Channel speaker.
Let's have a brief look at the main features
of Polk ES50 and Polk ES35 first before getting into our more
detailed comparison.
ES50 and ES35 are members of Polk Audio's Signature Elite series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk ES50 and Polk ES35 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk ES50 and Polk ES35 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ES50 and ES35 are 2-way speakers.
| Driver |
Polk ES50 |
Polk ES35 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
6 x 3-inch
|
ES50 features a 1" Terylene High-Res Soft-Dome Tweeter and 2 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the ES35 features a 1" Terylene High-res dome Tweeter and 6 x 3" mica-reinforced polypropylene Dynamic Balance Woofer .
Frequency Response
ES50 has a frequency range of 38-40k Hz whereas ES35 has a frequency range of 66-40k Hz. With a minimum frequency of 38Hz, the ES50 can go significantly deeper on the low side and provide stronger bass compared to the ES35's min frequency of 66Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES50 and ES35 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES50 sensitivity is rated at 88 dB and the ES35's is at 89 dB. This 1 dB difference makes the Polk ES35 a more sensitive speaker compared to Polk ES50, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
ES50 can handle a max power of 200 watts RMS from the amp the whereas ES35 has a max power handling value of 150 watts RMS, 50 watts less than the ES50.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ES50 features 5-Way post posts which make bi-amping or bi-wiring possible. ES35 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
Polk ES35's 5-Way post terminals
Cabinet Type and Port Position
ES50 has a bottom firing port whereas ES35 has a rear firing ports. Polk ES50's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk ES35 with its rear-firing port.
Polk ES35 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES50's and Polk ES35's external dimensions. Polk ES50 has external dimensions of 951.0 x 191.0 x 281.0mm ( 37-7/16 x 7-1/2 x 11-1/16inch) whereas Polk ES35 has external dimensions of 107.0 x 621.0 x 154.0mm ( 4-3/16 x 24-7/16 x 6-1/16inch) .
Polk ES35 is 844mm shorter and 127mm less deeper than Polk ES50 but it is also 430mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES50 is approximately 536.7cm2 / 83.2inch2 and base area of the Polk ES35 is approximately 956.3cm2 / 148.2inch2. The ES50 requires 44% less surface area than the ES35 which gives it a small advantage on placement in tight spaces.
What's in the Box of Polk ES50?
Here are the items that are included inside the box of ES50:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
What's in the Box of Polk ES35?
Here are the items that come with the ES35:
LCR loudspeakerGrille (attached)4 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration