In this review, we will be comparing two different type of speakers by Polk Audio. Polk Audio Signature Elite ES35 is a Center Channel speaker whereas the ES15 is a Bookshelf speaker.
Let's have a brief look at the main features
of Polk ES35 and Polk ES15 first before getting into our more
detailed comparison.
ES35 and ES15 are members of Polk Audio's Signature Elite series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk ES35 and Polk ES15 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk ES35 and Polk ES15 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ES35 and ES15 are 2-way speakers.
| Driver |
Polk ES35 |
Polk ES15 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
6 x 3-inch
|
1 x 5.25-inch
|
ES35 features a 1" Terylene High-res dome Tweeter and 6 x 3" mica-reinforced polypropylene Dynamic Balance Woofer . On the other hand, the ES15 features a 1" Terylene Soft-Dome Tweeter and 1 x 5.25" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
ES35 has a frequency range of 66-40k Hz whereas ES15 has a frequency range of 44-40k Hz. With a minimum frequency of 44Hz, the ES15 can go significantly deeper on the low side and provide stronger bass compared to the ES35's min frequency of 66Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES35 and ES15 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES35 sensitivity is rated at 89 dB and the ES15's is at 85 dB. This 4 dB difference makes the Polk ES35 a more sensitive speaker compared to Polk ES15, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
ES35 can handle a max power of 150 watts RMS from the amp the whereas ES15 has a max power handling value of 100 watts RMS, 50 watts less than the ES35.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ES35 features 5-Way post type posts and ES15 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Polk ES35's 5-Way post terminals
Polk ES15's 5-Way post terminals
Cabinet Type and Port Position
Both ES35 and ES15 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Polk ES35 Port
Polk ES15 Power Port Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES35's and Polk ES15's external dimensions. Polk ES35 has external dimensions of 107.0 x 621.0 x 154.0mm ( 4-3/16 x 24-7/16 x 6-1/16inch) whereas Polk ES15 has external dimensions of 307.0 x 193.0 x 259.0mm ( 12-1/16 x 7-9/16 x 10-3/16inch) .
Polk ES35 is 200mm shorter and 105mm less deeper than Polk ES15 but it is also 428mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES35 is approximately 956.3cm2 / 148.2inch2 and base area of the Polk ES15 is approximately 499.9cm2 / 77.5inch2. The ES35 requires 91% more surface area than the ES15 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Polk ES35?
Here are the items that are included inside the box of ES35:
LCR loudspeakerGrille (attached)4 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
What's in the Box of Polk ES15?
Here are the items that come with the ES15:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration