In this review, we will be comparing RP-8263FA and RP-6203F, two Passive Floor-standing speakers by Klipsch.
Let's have a brief look at the main features
of Klipsch RP-8263FA and Klipsch RP-6203F first before getting into our more
detailed comparison.
| Key Specs | Klipsch RP-8263FA | Klipsch RP-6203F |
|---|
| Brand | Klipsch
United States · founded 1946 | Klipsch
United States · founded 1946 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Tractrix Horn | 1" Tractrix Horn |
|---|
| Woofer | 2 x 8" Cerametallic | 2 x 6.5" Cerametallic |
|---|
| Frequency response | 35-25k Hz | 38-25k Hz |
|---|
| Sensitivity | 98 dB | 96 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | up to 150 watts | up to 125 watts |
|---|
| Dimensions (H x W x D) | 43-1/8" x 10-13/16" x 20-13/16"
1095.0 x 275.0 x 528.0mm | 39-5/8" x 9-5/16" x 17-9/16"
1006.0 x 236.0 x 446.0mm |
|---|
RP-8263FA and RP-6203F are members of Klipsch's Reference Premiere (RP) III series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) III Series
History
What size room are the Klipsch RP-8263FA and Klipsch RP-6203F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-8263FA |
Klipsch RP-6203F |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-8263FA and RP-6203F are 2-way speakers.
Klipsch RP-8263FAKlipsch RP-6203F
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Klipsch RP-8263FA |
Klipsch RP-6203F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 8-inch
|
2 x 6.5-inch
|
RP-8263FA features a 1" titanium Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer with a Crossover frequency at 1630 Hz. On the other hand, the RP-6203F features a 1" titanium Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer with a Crossover frequency at 1770 Hz.
Frequency Response
RP-8263FA has a frequency range of 35-25k Hz whereas RP-6203F has a frequency range of 38-25k Hz. With a minimum frequency of 35Hz, the RP-8263FA can go slightly deeper then the RP-6203F's min frequency of 38Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-8263FA and RP-6203F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-8263FA sensitivity is rated at 98 dB and the RP-6203F's is at 96 dB. This 2 dB difference makes the Klipsch RP-8263FA a more sensitive speaker compared to Klipsch RP-6203F, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
RP-8263FA can handle a max power of 150 watts RMS, whereas RP-6203F has a max power handling value of 125 watts RMS, 25 watts less than the RP-8263FA.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both RP-8263FA and RP-6203F features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Both RP-8263FA and RP-6203F have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-8263FA's and Klipsch RP-6203F's external dimensions. Klipsch RP-8263FA has external dimensions of 1095.0 x 275.0 x 528.0mm (43-1/8 x 10-13/16 x 20-13/16inch) whereas Klipsch RP-6203F has external dimensions of 1006.0 x 236.0 x 446.0mm (39-5/8 x 9-5/16 x 17-9/16inch).
Klipsch RP-8263FA is clearly the larger of the two speakers. Its body is 39mm wider, 89mm taller and 82mm deeper than Klipsch RP-6203F.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-8263FA is approximately 1452.0cm2 / 225.1inch2 and base area of the Klipsch RP-6203F is approximately 1052.6cm2 / 163.2inch2. The RP-8263FA requires 38% more surface area than the RP-6203F which gives it a small disadvantage on placement in tight spaces.