In this review, we will be comparing two different type of speakers by Klipsch. Klipsch Reference Premiere RP-6000F II is a Floor-standing speaker whereas the RP-504C II is a Center Channel speaker.
Let's have a brief look at the main features
of Klipsch RP-6000F II and Klipsch RP-504C II first before getting into our more
detailed comparison.
RP-6000F II and RP-504C II are members of Klipsch's Reference Premiere (RP) II series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) II Series History
What size room are the Klipsch RP-6000F II and Klipsch RP-504C II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-6000F II and Klipsch RP-504C II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-6000F II and RP-504C II are 2-way speakers.
| Driver |
Klipsch RP-6000F II |
Klipsch RP-504C II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
4 x 5.25-inch
|
RP-6000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 6.5" Cerametallic cone Woofer with a Crossover frequency at 1770 Hz. On the other hand, the RP-504C II features a 1" titanium Tractrix Horn Tweeter and 4 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1950 Hz.
Frequency Response
RP-6000F II has a frequency range of 38-25k Hz whereas RP-504C II has a frequency range of 50-25k Hz. With a minimum frequency of 38Hz, the RP-6000F II can go significantly deeper on the low side and provide stronger bass compared to the RP-504C II's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-6000F II and RP-504C II have the same Impedance of 8 ohms and their sensitivity is also same at 96 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-6000F II can handle a max power of 150 watts RMS from the amp the whereas RP-6000F II has a max power handling value of 125 watts RMS , 25 watts less than the RP-504C II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-6000F II features Binding post posts which make bi-amping or bi-wiring possible. RP-504C II has a Binding post which doesn't feature bi-amping/bi-wiring.
Klipsch RP-6000F II's Binding post terminals allows Bi-amping or bi-wiring
Klipsch RP-504C II's Binding post terminals
Cabinet Type and Port Position
Both RP-6000F II and RP-504C II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-6000F II's and Klipsch RP-504C II's external dimensions. Klipsch RP-6000F II has external dimensions of 1007.0 x 237.0 x 431.0mm ( 39-5/8 x 9-5/16 x 16-15/16inch) whereas Klipsch RP-504C II has external dimensions of 177.0 x 818.0 x 385.0mm ( 6-15/16 x 32-3/16 x 15-1/8inch) .
Klipsch RP-504C II is 830mm shorter and 46mm less deeper than Klipsch RP-6000F II but it is also 581mm wider.
Below you can see the front view size comparison of Klipsch RP-6000F II and Klipsch RP-504C II in scale.
Comparison image of Klipsch RP-6000F II and Klipsch RP-504C II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-6000F II is approximately 1021.5cm2 / 158.3inch2 and base area of the Klipsch RP-504C II is approximately 3149.3cm2 / 488.1inch2. The RP-6000F II requires 68% less surface area than the RP-504C II which gives it a small advantage on placement in tight spaces.
What's in the Box of Klipsch RP-6000F II?
Here are the items that are included inside the box of RP-6000F II:
Floorstanding loudspeakerStabilizer feet (pre-installed)Grille2 Terminal jumpers (pre-installed)Rubber cap (pre-installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-504C II?
Here are the items that come with the RP-504C II:
Center channel loudspeakerGrilleUser ManualImportant Safety InstructionsWarranty Information