In this review, we will be comparing two different type of speakers by Klipsch. Klipsch Reference Premiere RP-504C II is a Center Channel speaker whereas the RP-5000F II is a Floor-standing speaker.
Let's have a brief look at the main features
of Klipsch RP-504C II and Klipsch RP-5000F II first before getting into our more
detailed comparison.
Klipsch RP-504C II Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 4 x 5.25" Cerametallic cone Woofer
- 50-25k Hz Frequency Response
- 96 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 150watts
- Weight:16.50kg
- Dimensions (H x W x D): 177.0" x 32-3/16" x 15-1/8"( 177.0 x 818.0 x 385.0mm )
Klipsch RP-5000F II Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 2 x 5.25" Cerametallic cone Woofer
- 35-25k Hz Frequency Response
- 95 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:17.50kg
- Dimensions (H x W x D): 918.0" x 8-3/16" x 14-5/16"( 918.0 x 208.0 x 364.0mm )
RP-504C II and RP-5000F II are members of Klipsch's Reference Premiere (RP) II series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) II Series History
What size room are the Klipsch RP-504C II and Klipsch RP-5000F II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Klipsch RP-504C II |
Klipsch RP-5000F II |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-504C II and Klipsch RP-5000F II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-504C II and RP-5000F II are 2-way speakers.
| Driver |
Klipsch RP-504C II |
Klipsch RP-5000F II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
4 x 5.25-inch
|
2 x 5.25-inch
|
RP-504C II features a 1" titanium Tractrix Horn Tweeter and 4 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1950 Hz. On the other hand, the RP-5000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1900 Hz.
Frequency Response
RP-504C II has a frequency range of 50-25k Hz whereas RP-5000F II has a frequency range of 35-25k Hz. With a minimum frequency of 35Hz, the RP-5000F II can go significantly deeper on the low side and provide stronger bass compared to the RP-504C II's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-504C II and RP-5000F II have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-504C II sensitivity is rated at 96 dB and the RP-5000F II's is at 95 dB. This 1 dB difference makes the Klipsch RP-504C II a more sensitive speaker compared to Klipsch RP-5000F II, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-504C II can handle a max power of 150 watts RMS from the amp the whereas RP-5000F II has a max power handling value of 100 watts RMS, 50 watts less than the RP-504C II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-5000F II features Binding post posts which make bi-amping or bi-wiring possible. RP-504C II has a Binding post which doesn't feature bi-amping/bi-wiring.
Klipsch RP-504C II's Binding post terminals
Klipsch RP-5000F II's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both RP-504C II and RP-5000F II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-504C II's and Klipsch RP-5000F II's external dimensions. Klipsch RP-504C II has external dimensions of 177.0 x 818.0 x 385.0mm ( 6-15/16 x 32-3/16 x 15-1/8inch) whereas Klipsch RP-5000F II has external dimensions of 918.0 x 208.0 x 364.0mm ( 36-1/8 x 8-3/16 x 14-5/16inch) .
Klipsch RP-5000F II is 610mm narrower and 21mm less deeper than Klipsch RP-504C II but it is also 741mm taller.
Below you can see the front view size comparison of Klipsch RP-504C II and Klipsch RP-5000F II in scale.
Comparison image of Klipsch RP-504C II and Klipsch RP-5000F II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-504C II is approximately 3149.3cm2 / 488.1inch2 and base area of the Klipsch RP-5000F II is approximately 757.1cm2 / 117.4inch2. The RP-504C II requires 316% more surface area than the RP-5000F II which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Klipsch RP-504C II?
Here are the items that are included inside the box of RP-504C II:
Center channel loudspeakerGrilleUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-5000F II?
Here are the items that come with the RP-5000F II:
Floorstanding loudspeakerStabilizer feet (pre-installed)Grille2 Terminal jumpers (pre-installed)Rubber cap (pre-installed)User ManualImportant Safety InstructionsWarranty Information
Max Input Power 
Sensitivity 
Number of Woofers 
Height 
Price per pair* 
Bi-Amping and Bi-Wiring 
Dolby Atmos Drivers 
Base Surface Area