In this review, we will be comparing two different type of speakers by Klipsch. Klipsch Reference Premiere RP-404C II is a Center Channel speaker whereas the RP-6000F II is a Floor-standing speaker.
Let's have a brief look at the main features
of Klipsch RP-404C II and Klipsch RP-6000F II first before getting into our more
detailed comparison.
RP-404C II and RP-6000F II are members of Klipsch's Reference Premiere (RP) II series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) II Series History
What size room are the Klipsch RP-404C II and Klipsch RP-6000F II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-404C II and Klipsch RP-6000F II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-404C II and RP-6000F II are 2-way speakers.
| Driver |
Klipsch RP-404C II |
Klipsch RP-6000F II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
4 x 4-inch
|
2 x 6.5-inch
|
RP-404C II features a 1" titanium Tractrix Horn Tweeter and 4 x 4" Cerametallic cone Woofer with a Crossover frequency at 1900 Hz. On the other hand, the RP-6000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 6.5" Cerametallic cone Woofer with a Crossover frequency at 1770 Hz.
Frequency Response
RP-404C II has a frequency range of 87-25k Hz whereas RP-6000F II has a frequency range of 38-25k Hz. With a minimum frequency of 38Hz, the RP-6000F II can go significantly deeper on the low side and provide stronger bass compared to the RP-404C II's min frequency of 87Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-404C II and RP-6000F II have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-404C II sensitivity is rated at 94 dB and the RP-6000F II's is at 96 dB. This 2 dB difference makes the Klipsch RP-6000F II a more sensitive speaker compared to Klipsch RP-404C II, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-404C II and RP-6000F II has the same power range of up to 125 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-6000F II features Binding post posts which make bi-amping or bi-wiring possible. RP-404C II has a Binding post which doesn't feature bi-amping/bi-wiring.
Klipsch RP-404C II's Binding post terminals
Klipsch RP-6000F II's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-404C II's and Klipsch RP-6000F II's external dimensions. Klipsch RP-404C II has external dimensions of 147.0 x 683.0 x 166.0mm ( 5-3/4 x 26-7/8 x 6-1/2inch) whereas Klipsch RP-6000F II has external dimensions of 1007.0 x 237.0 x 431.0mm ( 39-5/8 x 9-5/16 x 16-15/16inch) .
Klipsch RP-404C II is 860mm shorter and 265mm less deeper than Klipsch RP-6000F II but it is also 446mm wider.
Below you can see the front view size comparison of Klipsch RP-404C II and Klipsch RP-6000F II in scale.
Comparison image of Klipsch RP-404C II and Klipsch RP-6000F II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-404C II is approximately 1133.8cm2 / 175.7inch2 and base area of the Klipsch RP-6000F II is approximately 1021.5cm2 / 158.3inch2. The RP-404C II requires 11% more surface area than the RP-6000F II which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Klipsch RP-404C II?
Here are the items that are included inside the box of RP-404C II:
Center channel loudspeakerGrilleUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-6000F II?
Here are the items that come with the RP-6000F II:
Floorstanding loudspeakerStabilizer feet (pre-installed)Grille2 Terminal jumpers (pre-installed)Rubber cap (pre-installed)User ManualImportant Safety InstructionsWarranty Information