Sonus faber Maxima Amator is a 2-way Passive Bass Reflex Floor-standing speaker by Sonus faber. It was released in 2020. It features a 1.1" Soft-Dome Tweeter and 1 x 7" Paper Woofer.
A 2-way ported floorstander with a 1.1 inch tweeter and a 7 inch mid/bass. 88 dB sensitive, 4 ohms, 25-125 W recommended, 35 Hz to 35 kHz. The Heritage collection revives the small solid-wood standmounts the company made its name with.
The speaker has a frequency range of 35-35k Hz and a sensitivity of 88 dB. Sonus faber Maxima Amator has an MSRP of 15000$ per pair.
Room Size Suitability
The size of the room where you plan to use the Sonus faber Maxima Amator is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Sonus faber's Heritage Series of Loudspeakers
Maxima Amator is a member of Sonus faber's Heritage series of Passive speakers. Below you can see the main specs of these speakers.
Sonus faber Heritage Series Speakers
Frequency Response of the Sonus faber Maxima Amator Speaker
Sonus faber Maxima Amator has a Frequency response range of 35-35k Hz and Power Range of 25-125 watts. With a minimum frequency of 35 Hz, Maxima Amator delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Maxima Amator's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Sonus faber Maxima Amator
Thinking about a subwoofer for the Sonus faber Maxima Amator?
Among the speakers in our database with a max MSRP price of 20000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Sonus faber Maxima Amator's 35Hz:
Crossover frequency of the Sonus faber Maxima Amator?
The crossover frequency of the Maxima Amator is set to 2100 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Sonus faber Maxima Amator's nominal impedance level is
4 ohms and has a sensitivity of
88 dB.
Sensitivity
Floor-standing Speakers
Sonus faber Maxima Amator
Nominal Impedance of the 4 Ohms means that the Sonus faber Maxima Amator is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Sonus faber Maxima Amator with an AVR but use an Integrated Amplifier instead.
Sensitivity
88dB of the Sonus faber Maxima Amator is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Sonus faber Maxima Amator plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Sonus faber Maxima Amator need?
At normal listening levels in a medium room, about
24–125 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
Maxima Amator has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Sonus faber Maxima Amator External Dimensions and Weight
Sonus faber Maxima Amator has external dimensions of (Height x Width x Depth) 44-1/8 x 11-13/16 x 13-3/4inch (1120.0 x 300.0 x 350.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Sonus faber Maxima Amator is approximately 1050.0cm2 / 162.8inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Sonus faber Maxima Amator weighs 38.00kg / 83.6lbs per piece. Here is a comparison of how Maxima Amator's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Sonus faber Maxima Amator
Weight
Floor-standing Speakers under $20000
Sonus faber Maxima Amator
Cabinet type and Materials
Sonus faber Maxima Amator has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Sonus faber Maxima Amator come with a Grille?
Maxima Amator comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Sonus faber Maxima Amator.
Official Product Page
Official manufacturer's product page for the Sonus faber Maxima Amator speaker can be found below:
Official Product Page for Sonus faber Maxima Amator