Perlisten S4b is a 3-way Passive Bass Reflex Bookshelf speaker by Perlisten. It was released in 2021. It features a Tweeter and x " Woofer. Perlisten lists the drivers as DPC-Array: 28mm Beryllium, 28mm (2) Textreme TPCD, Woofers: 180mm Textreme TPCD. The speaker has a frequency range of 36-37k Hz and a sensitivity of 85.4 dB. Perlisten S4b has an MSRP of 8790$ per pair.
Room Size Suitability
The size of the room where you plan to use the Perlisten S4b is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Frequency Response of the Perlisten S4b Speaker
Perlisten S4b has a Frequency response range of 36-37k Hz and Power Range of 50 - 300W RMS SPL Capability (100Hz - 20kHz) 111dB peak <2% - 2nd, 3rd Harmonics Certification THX Dominus Available Finishes Piano Black watts. With a minimum frequency of 36 Hz, S4b delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how S4b's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the Perlisten S4b?
Impedance and Sensitivity
Perlisten S4b's nominal impedance level is
4 ohms but can go down to as low as
3.2 ohms, and has a sensitivity of
85.4 dB.
Sensitivity
Bookshelf Speakers
Nominal Impedance of the 4 Ohms means that the Perlisten S4b is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Perlisten S4b with an AVR but use an Integrated Amplifier instead.
Sensitivity
With a sensitivity level of only 85 dB, Perlisten S4b is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Perlisten S4b plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the Perlisten S4b
Even though the nominal impedance of the S4b is 4 ohms, the minimum impedance level of this speaker according to Perlisten is 3.2 ohms Perlisten S4b so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Perlisten S4b need?
At normal listening levels in a medium room, about
47–300 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
S4b features Binding post type connectors.
Work out what gauge speaker cable this run needs →
Perlisten S4b External Dimensions and Weight
Perlisten S4b has external dimensions of (Height x Width x Depth) 16.54 x 9.45 x 11.81inch (420.1 x 240.0 x 300.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Perlisten S4b is approximately 720.0cm2 / 111.6inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Perlisten S4b weighs 11.00kg / 24.2lbs per piece. Here is a comparison of how S4b's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $10000
Cabinet type and Materials
Perlisten S4b has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Wall Mounting
S4b doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Perlisten S4b come with a Grille?
S4b comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Perlisten S4b.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Product Page
Official manufacturer's product page for the Perlisten S4b speaker can be found below:
Official Product Page for Perlisten S4b