JBL Studio 610 is a 2-way Passive Acoustic Suspension Surround speaker by JBL. It was released in 2021. It features a 1" Compression Driver Tweeter and 1 x 5.25" PolyPlas Woofer.
A wall-mountable Studio 6 surround: one 5.25 inch PolyPlas woofer and the same 1 inch compression driver on an HDI waveguide, sealed. Sold in pairs.
The speaker has a frequency range of 65-40k Hz and a sensitivity of 84 dB. JBL Studio 610 has an MSRP of 770$ per pair.
Room Size Suitability
The size of the room where you plan to use the JBL Studio 610 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
JBL's Studio 6 Series of Loudspeakers
Studio 610 is a member of JBL's Studio 6 series of Passive speakers. Below you can see the main specs of these speakers.
JBL Studio 6 Series Speakers
Frequency Response of the JBL Studio 610 Speaker
JBL Studio 610 has a Frequency response range of 65-40k Hz and Power Range of up to 100 watts. With a minimum frequency of 65 Hz, it is hard to expect a strong bass response from Studio 610 so depending on your use case, using a subwoofer will significantly help to widen the response range.
Here we have a comparison of how Studio 610's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Surround Speakers
Thinking about a subwoofer for the JBL Studio 610?
On the treble side, with its upper limit of 40 kHz, JBL Studio 610 has the highest frequency level among the Surround speakers in our database.
Crossover frequency of the JBL Studio 610?
The crossover frequency of the Studio 610 is set to 2.4 kHz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
JBL Studio 610's nominal impedance level is
6 ohms and has a sensitivity of
84 dB.
Sensitivity
Surround Speakers
Nominal Impedance of the 6 Ohms makes the JBL Studio 610 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 84 dB, JBL Studio 610 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the JBL Studio 610 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the JBL Studio 610 need?
At normal listening levels in a medium room, about
40–100 W
per channel into 6 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $1,000, or every amplifier we cover.
Input Type
Studio 610 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
JBL Studio 610 External Dimensions and Weight
JBL Studio 610 has external dimensions of (Height x Width x Depth) 11-13/16 x 9-13/16 x 5-5/16inch (300.0 x 250.0 x 135.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of JBL Studio 610 is approximately 337.5cm2 / 52.3inch2.
Find speakers that fit your shelf or alcove →
Cabinet type and Materials
JBL Studio 610 has a
Acoustic Suspension type cabinet. Acoustic Suspension loudspeakers aka Sealed speakers have no openings such as ports or slots.. They can be designed smaller, the bass is more accurate and tighter compared to ported designs but doesn't go as low on the lower end in general.
Does the JBL Studio 610 come with a Grille?
Studio 610 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the JBL Studio 610.
Official Product Page
Official manufacturer's product page for the JBL Studio 610 speaker can be found below:
Official Product Page for JBL Studio 610