Fyne Audio FA502iC LCR LCR is a 2-way Passive In-wall In-wall speaker by Fyne Audio. It was released in 2023. It features a Tweeter and x " Woofer.
Mid/Bass: 1 x 8" (200 mm) IsoFlare point source driver, multi-fiber High: FyneFlute surround with 25 mm titanium dome compression
The speaker has a sensitivity of 91 dB. Fyne Audio FA502iC LCR LCR has an MSRP of 644$.
Room Size Suitability
The size of the room where you plan to use the Fyne Audio FA502iC LCR LCR is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Fyne Audio FA502iC LCR LCR Speaker
Fyne Audio FA502iC LCR LCR has a Frequency response range of at ±3dB. With a minimum frequency of Hz, FA502iC LCR LCR delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how FA502iC LCR LCR's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
In-wall Speakers
Fyne Audio FA502iC LCR LCR
Thinking about a subwoofer for the Fyne Audio FA502iC LCR LCR?
Crossover frequency of the Fyne Audio FA502iC LCR LCR?
The crossover frequency of the FA502iC LCR LCR is set to 1700 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Fyne Audio FA502iC LCR LCR's nominal impedance level is
8 ohms and has a sensitivity of
91 dB.
Sensitivity
In-wall Speakers
Fyne Audio FA502iC LCR LCR
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Fyne Audio FA502iC LCR LCR is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
91dB of the Fyne Audio FA502iC LCR LCR is considered a high sensitivity compared to average stereo speaker which makes FA502iC LCR LCR an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Fyne Audio FA502iC LCR LCR will be a good choice. Work out how loud the Fyne Audio FA502iC LCR LCR plays in your room →
What amplifier does the Fyne Audio FA502iC LCR LCR need?
At normal listening levels in a medium room, about
6.0–95 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $750, or every amplifier we cover.
Input Type
FA502iC LCR LCR features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Fyne Audio FA502iC LCR LCR External Dimensions and Weight
Fyne Audio FA502iC LCR LCR has external dimensions of (Height x Width x Depth) .
Cabinet type and Materials
Fyne Audio FA502iC LCR LCR has a
In-wall type cabinet.
Does the Fyne Audio FA502iC LCR LCR come with a Grille?
FA502iC LCR LCR comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Fyne Audio FA502iC LCR LCR.
Official Product Page
Official manufacturer's product page for the Fyne Audio FA502iC LCR LCR speaker can be found below:
Official Product Page for Fyne Audio FA502iC LCR LCR