Fyne Audio F700 is a 2-way Passive Bass Reflex Bookshelf speaker by Fyne Audio. It was released in 2023. It features a Tweeter and x " Woofer.
1 x 5.9" (150 mm) IsoFlare point source driver, multi-fiber bass/ midrange cone High: FyneFlute surround with 25 mm magnesium dome compression tweeter
The speaker has a frequency range of 40-34k Hz and a sensitivity of 89 dB. Fyne Audio F700 has an MSRP of 3899$ per pair.
Room Size Suitability
The size of the room where you plan to use the Fyne Audio F700 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Fyne Audio F700 Speaker
Fyne Audio F700 has a Frequency response range of 40-34k Hz at ±3dB. With a minimum frequency of 40 Hz, F700 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how F700's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the Fyne Audio F700?
Crossover frequency of the Fyne Audio F700?
The crossover frequency of the F700 is set to 1700 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Fyne Audio F700's nominal impedance level is
8 ohms and has a sensitivity of
89 dB.
Sensitivity
Bookshelf Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Fyne Audio F700 is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
89dB of the Fyne Audio F700 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Fyne Audio F700 plays in your room →
What amplifier does the Fyne Audio F700 need?
At normal listening levels in a medium room, about
9.5–150 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $5,000, or every amplifier we cover.
Input Type
F700 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Fyne Audio F700 External Dimensions and Weight
Fyne Audio F700 has external dimensions of (Height x Width x Depth) 13.7 x 8.8 x 13.3inch (348.0 x 223.5 x 337.8mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Fyne Audio F700 is approximately 755.0cm2 / 117.0inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Fyne Audio F700 weighs 8.98kg / 19.8lbs per piece. Here is a comparison of how F700's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $5000
Cabinet type and Materials
Fyne Audio F700 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Wall Mounting
F700 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Fyne Audio F700 come with a Grille?
F700 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Fyne Audio F700.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Product Page
Official manufacturer's product page for the Fyne Audio F700 speaker can be found below:
Official Product Page for Fyne Audio F700