Elac Vela 2.0 VFS408.2-GB is a 3-way Passive Bass Reflex Floor-standing speaker by ELAC. It features a JET 6 AMT Tweeter and 2 x 7" AS XR cone Woofer. The speaker has a frequency range of 28-50k Hz and a sensitivity of 88.5 dB. Elac Vela 2.0 VFS408.2-GB has an MSRP of 6999$ per pair but can often be found around 6998$ per pair.
Room Size Suitability
The size of the room where you plan to use the Elac Vela 2.0 VFS408.2-GB is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
ELAC's Vela 2.0 Series of Loudspeakers
Vela 2.0 VFS408.2-GB is a member of ELAC's Vela 2.0 series of Passive speakers. Below you can see the main specs of these speakers.
ELAC Vela 2.0 Series Speakers
ELAC Vela 2.0 Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Elac Vela 2.0 VFS408.2-GB Speaker
Elac Vela 2.0 VFS408.2-GB has a Frequency response range of 28-50k Hz at ±3dB and Power Range of Up to 220 watts. With a minimum frequency of 28 Hz, Vela 2.0 VFS408.2-GB delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Vela 2.0 VFS408.2-GB's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
Elac Vela 2.0 VFS408.2-GB
High Frequency
Floor-standing Speakers
Elac Vela 2.0 VFS408.2-GB
Crossover frequency of the Elac Vela 2.0 VFS408.2-GB?
Vela 2.0 VFS408.2-GB is a 3-way speaker and its crossover frequency between the woofer and the midrange set to 450Hz and the Crossover frequency between the midrange and the tweeter is set to 2550Hz.
Impedance and Sensitivity
Elac Vela 2.0 VFS408.2-GB's nominal impedance level is
4 ohms but can go down to as low as
3.2 ohms, and has a sensitivity of
88.5 dB.
Sensitivity
Floor-standing Speakers
Elac Vela 2.0 VFS408.2-GB
Nominal Impedance of the 4 Ohms means that the Elac Vela 2.0 VFS408.2-GB is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Elac Vela 2.0 VFS408.2-GB with an AVR but use an Integrated Amplifier instead.
Sensitivity
89dB of the Elac Vela 2.0 VFS408.2-GB is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise.
Minimum Impedance of the Elac Vela 2.0 VFS408.2-GB
Even though the nominal impedance of the Vela 2.0 VFS408.2-GB is 4 ohms, the minimum impedance level of this speaker according to ELAC is 3.2 ohms Elac Vela 2.0 VFS408.2-GB so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
Check the amplifiers that are in a similar price range to the Elac Vela 2.0 VFS408.2-GB:
Input Type
Vela 2.0 VFS408.2-GB features type connectors. Bi-amping and Bi-wiring are not possible.
Elac Vela 2.0 VFS408.2-GB External Dimensions and Weight
Elac Vela 2.0 VFS408.2-GB has external dimensions of (Height x Width x Depth) 44.96 x 10.87 x 13.07 inches (1142 x 276 x 332 mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Elac Vela 2.0 VFS408.2-GB is approximately 916.3cm2 / 142.0inch2.
WeightThe Elac Vela 2.0 VFS408.2-GB weighs 27.10kg / 59.6lbs per piece. Here is a comparison of how Vela 2.0 VFS408.2-GB's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Elac Vela 2.0 VFS408.2-GB
Weight
Floor-standing Speakers under $10000
Elac Vela 2.0 VFS408.2-GB
How does the Elac Vela 2.0 VFS408.2-GB compare to the Elac Vela 2.0 VFS409.2-GB?
One of the natural alternative to the Elac Vela 2.0 VFS408.2-GB is the Vela 2.0 VFS409.2-GB which is located one step higher in ELAC's Passive Floorstanding selection.
Check the Detailed Comparison of Elac Vela 2.0 VFS408.2-GB vs Vela 2.0 VFS409.2-GB for more details.
Cabinet type and Materials
Elac Vela 2.0 VFS408.2-GB has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Elac Vela 2.0 VFS408.2-GB is a bottom-firing port speaker
Available colors
Elac Vela 2.0 VFS408.2-GB is available in Black High Gloss, White High Gloss and Walnut High Gloss.
Recommended Accessories
Here is a list of accessories that we think you may need for the Elac Vela 2.0 VFS408.2-GB.
Official Brochure
Here is a link to download the official brochure for the Elac Vela 2.0 VFS408.2-GB speaker:
Official Brochure for Elac Vela 2.0 VFS408.2-GB
Official Product Page
Official manufacturer's product page for the Elac Vela 2.0 VFS408.2-GB speaker can be found below:
Official Product Page for Elac Vela 2.0 VFS408.2-GB