Dynaudio Emit 50 is a 3-way Passive Bass Reflex Floor-standing speaker by Dynaudio. It was released in 2021. It features a 1.1" Soft-Dome Tweeter, 1 x 6" Midrange and 2 x 7" MSP Woofer.
A 3-way floorstander with 2 x 7 inch MSP woofer, a 6 inch MSP midrange and the 28 mm Cerotar tweeter. 86 dB sensitive, 4 ohms, 240 W IEC long-term, 33 Hz to 25 kHz. Emit is the entry range: the Cerotar tweeter borrowed from Evoke, with the Hexis inner dome that smooths the response behind the fabric, over one-piece MSP cones.
The speaker has a frequency range of 33-25k Hz and a sensitivity of 86 dB.
Room Size Suitability
The size of the room where you plan to use the Dynaudio Emit 50 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Dynaudio's Emit Series of Loudspeakers
Emit 50 is a member of Dynaudio's Emit series of Passive speakers. Emit is Dynaudio's affordable entry range, bringing the Danish brand's driver technology to a budget price. Below you can see the main specs of these speakers.
See all 6 Dynaudio Emit models compared »
Dynaudio Emit Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Dynaudio Emit 50 Speaker
Dynaudio Emit 50 has a Frequency response range of 33-25k Hz at ±3dB. With a minimum frequency of 33 Hz, Emit 50 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Emit 50's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Crossover frequency of the Dynaudio Emit 50?
Emit 50 is a 3-way speaker and its crossover frequency between the woofer and the midrange set to Hz and the Crossover frequency between the midrange and the tweeter is set to Hz.
Impedance and Sensitivity
Dynaudio Emit 50's nominal impedance level is
4 ohms and has a sensitivity of
86 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the Dynaudio Emit 50 is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Dynaudio Emit 50 with an AVR but use an Integrated Amplifier instead.
Sensitivity
With a sensitivity level of only 86 dB, Dynaudio Emit 50 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps.
Browse all integrated amplifiers
Input Type
Emit 50 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Dynaudio Emit 50 External Dimensions and Weight
Dynaudio Emit 50 has external dimensions of (Height x Width x Depth) 44-7/8 x 8-1/16 x 12-5/16inch (1140.0 x 205.0 x 312.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Dynaudio Emit 50 is approximately 639.6cm2 / 99.1inch2.
WeightThe Dynaudio Emit 50 weighs 26.00kg / 57.2lbs per piece. Here is a comparison of how Emit 50's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Cabinet type and Materials
Dynaudio Emit 50 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Dynaudio Emit 50 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Does the Dynaudio Emit 50 come with a Grille?
Emit 50 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Dynaudio Emit 50.
Official Product Page
Official manufacturer's product page for the Dynaudio Emit 50 speaker can be found below:
Official Product Page for Dynaudio Emit 50