In this review, we will be comparing Emit 50 and Kendall, two Passive Floor-standing speakers from Dynaudio and KLH.
Let's have a brief look at the main features
of Dynaudio Emit 50 and KLH Kendall first before getting into our more
detailed comparison.
| Key Specs | Dynaudio Emit 50 | KLH Kendall |
|---|
| Brand | Dynaudio
Denmark · founded 1977 | KLH
United States · founded 1957 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 1.1" Soft-Dome | 1" |
|---|
| Midrange | 6" | 5.25" |
|---|
| Woofer | 2 x 7" MSP | 2 x 6.5" Woven Kevlar |
|---|
| Frequency response | 33-25k Hz | 25-23k Hz |
|---|
| Sensitivity | 86 dB | 96 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | — | up to 250 watts |
|---|
| Weight | 26.00kg / 57.2lbs | 22.14kg / 48.7lbs |
|---|
| Dimensions (H x W x D) | 44-7/8" x 8-1/16" x 12-5/16"
1140.0 x 205.0 x 312.0mm | 40-3/16" x 8-5/16" x 14-15/16"
1021.0 x 212.0 x 380.0mm |
|---|
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Emit 50 and Kendall are 3-way speakers.
Dynaudio Emit 50KLH Kendall
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Dynaudio Emit 50 |
KLH Kendall |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 5.25-inch |
|
Woofer
|
2 x 7-inch
|
2 x 6.5-inch
|
Emit 50 features a 1.1" Cerotar Soft-Dome Tweeter, a 6" Midrange and 2 x 7" MSP Woofer with a Crossover frequency at 540/4400 HZ. On the other hand, the Kendall features a 1" anodized aluminum Tweeter, a 5.25" Midrange and 2 x 6.5" Woven Kevlar Woofer.
Frequency Response
Emit 50 has a frequency range of 33-25k Hz whereas Kendall has a frequency range of 25-23k Hz. With a minimum frequency of 25Hz, the Kendall can go significantly deeper on the low side and provide stronger bass compared to the Emit 50's min frequency of 33Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Emit 50 is a 4 ohms speaker compared to the Kendall which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Emit 50 can provide this impedance level.
These two speakers also have different sensitivity levels. Emit 50 sensitivity is rated at 86 dB and the Kendall's is rated at 96 dB. This 10 dB difference makes the KLH Kendall a more sensitive speaker compared to Dynaudio Emit 50, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Kendall features Binding post posts which make bi-amping or bi-wiring possible. Emit 50 has a Binding post which doesn't feature bi-amping/bi-wiring.
KLH Kendall's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Emit 50's and KLH Kendall's external dimensions. Dynaudio Emit 50 has external dimensions of 1140.0 x 205.0 x 312.0mm (44-7/8 x 8-1/16 x 12-5/16inch) whereas KLH Kendall has external dimensions of 1021.0 x 212.0 x 380.0mm (40-3/16 x 8-5/16 x 14-15/16inch).
Dynaudio Emit 50 is 7mm narrower and 68mm less deeper than KLH Kendall but it is also 119mm taller.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
KLH Kendall needs about 26% more floor or shelf area. KLH Kendall is 68mm deeper, so it stands that much further out from the wall. Dynaudio Emit 50 is 119mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Emit 50 is approximately 639.6cm2 / 99.1inch2 and base area of the KLH Kendall is approximately 805.6cm2 / 124.9inch2. The Emit 50 requires 21% less surface area than the Kendall which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Dynaudio Emit 50 weighs 26.00kg / 57.2lbs and the KLH Kendall weighs 22.14kg / 48.7lbs. This makes the Emit 50 17% heavier than the Kendall.
Here is a comparison of how Emit 50 and Kendall's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of KLH Kendall?
Here are the items that come with the Kendall:
- Floorstanding loudspeaker
- Grille
- Foam port
- 4 Rubber feet
- 4 Spike feet (with nuts)
- 4 Protective discs
- Manual
 Woofer Size |
7 inches
vs
6.5 inches
|
Larger woofer |
 High Frequency Response |
25k Hz
vs
23k Hz
|
Generates higher frequency |
 Base Surface Area |
639cm2
vs
805cm2
|
Takes less floor space |
 Max Input Power |
250 watts
vs
240 watts
|
Handle more power from your amplifier |
 Sensitivity |
96 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
|
Low Frequency Response |
25 Hz
vs
33 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1021mm
vs
1140mm
|
Easier to fit in smaller spaces |
 Price per pair* |
1500USD
vs
2249USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Dynaudio Emit 50 |
KLH Kendall |
| Brand |
Dynaudio |
KLH |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Sensitivity |
86 dB |
96 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
33-25k Hz |
25-23k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
7" |
6.5" |
| Woofer Composition |
MSP |
Woven Kevlar |
| Woofer Surround Material |
n/a |
Butyl Rubber |
| Tweeter Size |
1.1" |
1" |
| Tweeter Type |
Soft-Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
5.25" |
| Crossover Frequency |
540/4400 HZ |
n/a |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
1140.0mm (44.9") |
1021.0mm (40.2") |
| Width |
205.0mm (8.1") |
212.0mm (8.3") |
| Depth |
312.0mm (12.3") |
380.0mm (15") |
| Weight |
26.00kg (57.2lbs) |
22.14kg (48.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood Veneer |
| Available Colors |
n/a |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
|
10 Years |
| Labor Warranty |
|
10 Years |
No single best speaker here - they are built to different priorities, and the right one depends on your room, your amplifier and what you listen to.
| Area | Better | Why |
|---|
| Bass | B | KLH Kendall digs deeper - 25Hz against 33Hz. A subwoofer would even that out. |
| Amplifier needs | B | KLH Kendall is more sensitive (96dB vs 86dB), so it goes louder on the same amplifier. |
| Amplifier match | B | KLH Kendall is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | evenly matched | Similar power handling (240W vs 250W). |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Expandability | depends | KLH Kendall: bi-amping. Dynaudio Emit 50 sits in a wider range (6 models), so a matched surround system is easier later. |
| Price | B | KLH Kendall is cheaper - $1,500 against $2,249, about 33% less. |
A Dynaudio Emit 50 B KLH Kendall
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
KLH Kendall is the easier recommendation: it leads on most of the measured areas and costs less. Take Dynaudio Emit 50 if its size, looks or fit in your room suit you better. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 33Hz anyway, so judge these on the other rows instead. If your amplifier is modest, vintage or valve-based, KLH Kendall is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.