DALI Epicon 6 is a 2-way Passive Bass Reflex Floor-standing speaker by DALI. It was released in 2024. It features a 1.14" Hybrid dome + planar Tweeter and 2 x 6.5" Wood fibre Woofer.
DALI publishes the driver complement as: 2 x 6½ inch low/mid, 1 x 29 mm soft dome, 1 x 10 x 55 mm planar high frequency.
The speaker has a frequency range of 35-30k Hz and a sensitivity of 88 dB.
DALI's Epicon Series of Loudspeakers
Epicon 6 is a member of DALI's Epicon series of Passive speakers. Below you can see the main specs of these speakers.
See all 4 DALI Epicon models compared »
DALI Epicon Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the DALI Epicon 6 Speaker
DALI Epicon 6 has a Frequency response range of 35-30k Hz at ±0.0dB and Power Range of 50-300 watts. With a minimum frequency of 35 Hz, Epicon 6 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Epicon 6's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Crossover frequency of the DALI Epicon 6?
The Crossover frequency of the Epicon 6 is set to 700 / 2550 / 15000Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
DALI Epicon 6's nominal impedance level is
5 ohms and has a sensitivity of
88 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 5 Ohms makes the DALI Epicon 6 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
88dB of the DALI Epicon 6 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise.
Browse all integrated amplifiers
Input Type
Epicon 6 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
DALI Epicon 6 External Dimensions and Weight
DALI Epicon 6 has external dimensions of (Height x Width x Depth) .
Weight
All Floor-standing Speakers
Cabinet type and Materials
DALI Epicon 6 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the DALI Epicon 6 come with a Grille?
Epicon 6 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the DALI Epicon 6.
Official Product Page
Official manufacturer's product page for the DALI Epicon 6 speaker can be found below:
Official Product Page for DALI Epicon 6
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.