ATC SCM20ASLT is a 2-way Powered Sealed Floor-standing speaker by ATC. It was released in 2022. The built-in power amplifier saves space & eliminates the need to connect ATC SCM20ASLT to a stereo receiver or external power amp. It features a Tweeter and 1 x " Woofer.
1 x 150mm/6”, SB75-150SL 8Ω; 1 x 25mm/1”, SH25-76S 6Ω
The speaker has a frequency range of 55-25k Hz and a sensitivity of 4 dB. ATC SCM20ASLT has an MSRP of 12499$ per pair.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the ATC SCM20ASLT Speaker
ATC SCM20ASLT has a Frequency response range of 55-25k Hz at ±3dB and Power Range of 75W-300W watts. With a minimum frequency of 55 Hz, SCM20ASLT delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Here we have a comparison of how SCM20ASLT's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the ATC SCM20ASLT?
Crossover frequency of the ATC SCM20ASLT?
The crossover frequency of the SCM20ASLT is set to 2.2kHz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Inputs and Outputs
- USB Port:
- Subwoofer Output
- Digital Input:
- HDMI Input:
- Headphone Jack:
- Ethernet Port
ATC SCM20ASLT External Dimensions and Weight
ATC SCM20ASLT has external dimensions of (Height x Width x Depth) 38.98 x 9.41 x 14.41inch (990.0 x 239.0 x 366.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of ATC SCM20ASLT is approximately 874.7cm2 / 135.6inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe ATC SCM20ASLT weighs 30.20kg / 66.4lbs per piece. Here is a comparison of how SCM20ASLT's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $20000
Cabinet type and Materials
ATC SCM20ASLT has a
Sealed type cabinet.
Does the ATC SCM20ASLT come with a Grille?
SCM20ASLT comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the ATC SCM20ASLT.
Official Product Page
Official manufacturer's product page for the ATC SCM20ASLT speaker can be found below:
Official Product Page for ATC SCM20ASLT