In this review, we will be comparing two different type of speakers by Revel. Revel Performa3 C208 is a Center Channel speaker whereas the Performa3 F206 is a Floor-standing speaker.
Let's have a brief look at the main features
of Revel Performa3 C208 and Revel Performa3 F206 first before getting into our more
detailed comparison.
Revel Performa3 C208 and Performa3 F206 are members of Revel's Performa3 series of speakers. Below you can find the loudspeakers from this series.
Revel Performa3 Series History
What size room are the Revel Performa3 C208 and Revel Performa3 F206 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Revel Performa3 C208 and Revel Performa3 F206 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Revel Performa3 C208 and Performa3 F206 are 3-way speakers.
| Driver |
Revel Performa3 C208 |
Revel Performa3 F206 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 4-inch |
1 x 5.25-inch |
|
Woofer
|
2 x 8-inch
|
2 x 6.5-inch
|
Revel Performa3 C208 features a 1" aluminum dome with proprietary acoustic lens and waveguide Tweeter , a 4" Midrange and 2 x 8" anodized aluminum cone with cast frames Woofer . On the other hand, the Performa3 F206 features a 1" Aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter , a 5.25" Midrange and 2 x 6.5" Aluminum Woofer with a Crossover frequency at 275Hz and 2150Hz.
Frequency Response
Revel Performa3 C208 has a frequency range of 50Hz- 20kHz whereas Performa3 F206 has a frequency range of 42Hz- 20kHz. With a minimum frequency of 42Hz, the Performa3 F206 can go significantly deeper on the low side and provide stronger bass compared to the Revel Performa3 C208's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Revel Performa3 C208 and Performa3 F206 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Revel Performa3 C208 sensitivity is rated at 89 dB and the Performa3 F206's is at 88 dB. This 1 dB difference makes the Revel Performa3 C208 a more sensitive speaker compared to Revel Performa3 F206, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Revel Performa3 C208 can handle a max power of 350 watts RMS from the amp the whereas Performa3 F206 has a max power handling value of 200 watts RMS, 150 watts less than the Revel Performa3 C208.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Revel Performa3 C208 features Binding post type posts and Performa3 F206 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Revel Performa3 C208's Binding post terminals
Revel Performa3 F206's Binding post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel Performa3 C208's and Revel Performa3 F206's external dimensions. Revel Performa3 C208 has external dimensions of 307.0 x 737.0 x 348.0mm ( 12-1/16 x 29 x 13-11/16inch) whereas Revel Performa3 F206 has external dimensions of 1058.0 x 254.0 x 353.0mm ( 41-5/8 x 10 x 13-7/8inch) .
Revel Performa3 C208 is 751mm shorter and 5mm less deeper than Revel Performa3 F206 but it is also 483mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel Performa3 C208 is approximately 2564.8cm2 / 397.5inch2 and base area of the Revel Performa3 F206 is approximately 896.6cm2 / 139.0inch2. The Revel Performa3 C208 requires 186% more surface area than the Performa3 F206 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Revel Performa3 C208?
Here are the items that are included inside the box of Revel Performa3 C208:
Center-channel loudspeakerGrille2 Short feet2 Long feet2 Terminal jumpers (pre-installed)Owners Manual
What's in the Box of Revel Performa3 F206?
Here are the items that come with the Performa3 F206:
Floorstanding loudspeakerGrille4 Spike feet4 Locking rings4 WashersFoam port plugOwners Manual