In this review, we will be comparing two different types of speakers by Polk Audio. Polk Audio TSi CS10 is a Center Channel speaker whereas the TSi200 is a Bookshelf speaker.
Let's have a brief look at the main features
of Polk TSi CS10 and Polk TSi200 first before getting into our more
detailed comparison.
| Key Specs | Polk TSi CS10 | Polk TSi200 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Dynamic Balance | 1" Dome |
|---|
| Woofer | 2 x 5.25" bi-laminate organic fiber cone | 2 x 5.25" Organic Fiber |
|---|
| Frequency response | 63-24k Hz | 50-24k Hz |
|---|
| Sensitivity | 91 dB | 89 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 20-125 watts | 20-150 watts |
|---|
| Weight | 7.27kg / 16lbs | 7.71kg / 17lbs |
|---|
| Dimensions (H x W x D) | 6-9/16" x 20-1/16" x 9-15/16"
167.0 x 510.0 x 253.0mm | 15.4" x 8.0" x 11.7"
392.1 x 203.2 x 298.5mm |
|---|
TSi CS10 and TSi200 are members of Polk Audio's TSi series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk TSi CS10 and Polk TSi200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk TSi CS10 |
Polk TSi200 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both TSi CS10 and TSi200 are 2-way speakers.
Polk TSi CS10Polk TSi200
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Polk TSi CS10 |
Polk TSi200 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
2 x 5.25-inch
|
TSi CS10 features a 1" silk dome Dynamic Balance Tweeter and 2 x 5.25" bi-laminate organic fiber cone Woofer. On the other hand, the TSi200 features a 1" Dome Tweeter and 2 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz.
Frequency Response
TSi CS10 has a frequency range of 63-24k Hz whereas TSi200 has a frequency range of 50-24k Hz. With a minimum frequency of 50Hz, the TSi200 can go significantly deeper on the low side and provide stronger bass compared to the TSi CS10's min frequency of 63Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
TSi CS10 and TSi200 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. TSi CS10 sensitivity is rated at 91 dB and the TSi200's is at 89 dB. This 2 dB difference makes the Polk TSi CS10 a more sensitive speaker compared to Polk TSi200, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
TSi200 can handle a max power of 150 watts RMS, whereas TSi CS10 has a max power handling value of 125 watts RMS, 25 watts less than the TSi200.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
TSi CS10 features Pair of 5-way binding posts - Gold-plated type posts and TSi200 has a Pair of 5-way binding posts - Gold-plated type posts. None of these speakers feature bi-amping/bi-wiring.
Cabinet Type and Port Position
Both TSi CS10 and TSi200 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk TSi CS10's and Polk TSi200's external dimensions. Polk TSi CS10 has external dimensions of 167.0 x 510.0 x 253.0mm (6-9/16 x 20-1/16 x 9-15/16inch) whereas Polk TSi200 has external dimensions of 392.1 x 203.2 x 298.5mm (15.4 x 8.0 x 11.7inch).
Polk TSi CS10 is 225.1mm shorter and 45.5mm less deeper than Polk TSi200 but it is also 306.8mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk TSi CS10 is approximately 1290.3cm2 / 200.0inch2 and base area of the Polk TSi200 is approximately 606.6cm2 / 94.0inch2. The TSi CS10 requires 113% more surface area than the TSi200 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Polk TSi CS10?
Here are the items that are included inside the box of TSi CS10:
- Black center-channel speaker (removable cloth grille)
- 4 Self-adhesive rubber feet
- Owners Manual
- Online registration sheet
- Polk Audio product brochure
What's in the Box of Polk TSi200?
Here are the items that come with the TSi200:
- 2 Black bookshelf speakers
- Detachable cloth grille (installed)
- 8 Self-adhesive rubber feet
- Owner's Manual Online registration sheet
- Polk Audio product brochure