In this review, we will be comparing two different type of speakers by Polk Audio. Polk Audio Signature Elite ES55 is a Floor-standing speaker whereas the ES10 is a Bookshelf speaker.
Let's have a brief look at the main features
of Polk ES55 and Polk ES10 first before getting into our more
detailed comparison.
ES55 and ES10 are members of Polk Audio's Signature Elite series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk ES55 and Polk ES10 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk ES55 and Polk ES10 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ES55 and ES10 are 2-way speakers.
| Driver |
Polk ES55 |
Polk ES10 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
3 x 6.5-inch
|
1 x 4-inch
|
ES55 features a 1" Terylene High-Res Soft-Dome Tweeter and 3 x 6.5" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the ES10 features a 1" Terylene Soft-Dome Tweeter and 1 x 4" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz.
Frequency Response
ES55 has a frequency range of 34-40k Hz whereas ES10 has a frequency range of 78-40k Hz. With a minimum frequency of 34Hz, the ES55 can go significantly deeper on the low side and provide stronger bass compared to the ES10's min frequency of 78Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ES55 and ES10 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. ES55 sensitivity is rated at 89 dB and the ES10's is at 84 dB. This 5 dB difference makes the Polk ES55 a more sensitive speaker compared to Polk ES10, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
ES55 can handle a max power of 200 watts RMS from the amp the whereas ES10 has a max power handling value of 100 watts RMS, 100 watts less than the ES55.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ES55 features 5-Way post posts which make bi-amping or bi-wiring possible. ES10 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
Polk ES10's 5-Way post terminals
Cabinet Type and Port Position
ES55 has a bottom firing port whereas ES10 has a rear firing ports. Polk ES55's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk ES10 with its rear-firing port.
Polk ES10 Power Port Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk ES55's and Polk ES10's external dimensions. Polk ES55 has external dimensions of 1056.0 x 216.0 x 315.0mm ( 41-9/16 x 8-1/2 x 12-3/8inch) whereas Polk ES10 has external dimensions of 215.0 x 139.0 x 158.0mm ( 8-7/16 x 5-7/16 x 6-3/16inch) .
Polk ES55 is clearly the larger of the two speakers. Its body is 77mm wider, 841mm taller and 157mm deeper than Polk ES10.
Below you can see the front view size comparison of Polk ES55 and Polk ES10 in scale.
Comparison image of Polk ES55 and Polk ES10 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk ES55 is approximately 680.4cm2 / 105.5inch2 and base area of the Polk ES10 is approximately 219.6cm2 / 34.0inch2. The ES55 requires 210% more surface area than the ES10 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Polk ES55?
Here are the items that are included inside the box of ES55:
Floorstanding loudspeakerGrille (attached)4 Feet (pre-installed)Owners ManualOnline Product Registration
What's in the Box of Polk ES10?
Here are the items that come with the ES10:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration