In this review, we will be comparing two different type of speakers by Polk Audio. Polk Audio Reserve R400 is a Center Channel speaker whereas the R600 is a Floor-standing speaker.
Let's have a brief look at the main features
of Polk R400 and Polk R600 first before getting into our more
detailed comparison.
R400 and R600 are members of Polk Audio's Reserve series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk R400 and Polk R600 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk R400 and Polk R600 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R400 and R600 are 2-way speakers.
| Driver |
Polk R400 |
Polk R600 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
R400 features a 1" Pinnacle Ring Radiator Tweeter and 2 x 6.5" Polypropylene Turbine Cone Woofer with a Crossover frequency at 2500Hz. On the other hand, the R600 features a 1" Pinnacle Ring Radiator Tweeter and 2 x 6.5" Polypropylene Turbine Cone Woofer with a Crossover frequency at 2700Hz.
Frequency Response
R400 has a frequency range of 48-39K Hz whereas R600 has a frequency range of 43-38k Hz. With a minimum frequency of 43Hz, the R600 can go significantly deeper on the low side and provide stronger bass compared to the R400's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R400 and R600 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R400 sensitivity is rated at 89 dB and the R600's is at 87.5 dB. This 1 dB difference makes the Polk R400 a more sensitive speaker compared to Polk R600, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R400 features Post type posts and R600 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Polk R400's Binding post terminals
Polk R600's Post terminals
Cabinet Type and Port Position
R400 has a rear firing port whereas R600 has a bottom firing ports. Polk R600's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk R400 with its rear-firing port.
Polk R400 dual Port
Polk R600 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk R400's and Polk R600's external dimensions. Polk R400 has external dimensions of 199.0 x 618.0 x 372.0mm ( 7-13/16 x 24-5/16 x 14-5/8inch) whereas Polk R600 has external dimensions of 1063.8 x 280.7 x 381.6mm ( 41.9 x 11 x 15inch) .
Polk R400 is 864.8mm shorter and 9.6mm less deeper than Polk R600 but it is also 337.3mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk R400 is approximately 2299.0cm2 / 356.3inch2 and base area of the Polk R600 is approximately 1071.2cm2 / 166.0inch2. The R400 requires 115% more surface area than the R600 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Polk R400?
Here are the items that are included inside the box of R400:
Center-channel loudspeakerGrilleOwners ManualOnline Registration
What's in the Box of Polk R600?
Here are the items that come with the R600:
Floorstanding loudspeaker
4 Outrigger feet (pre-installed)
4 Rubber feet (pre-installed)
4 Spike feet (pre-installed)
Grille
Hex-key
Owner's Manual
Online Registration