In this review, we will be comparing two different type of speakers by Polk Audio. Polk Audio Reserve R600 is a Floor-standing speaker whereas the R200 is a Bookshelf speaker.
Let's have a brief look at the main features
of Polk R600 and Polk R200 first before getting into our more
detailed comparison.
R600 and R200 are members of Polk Audio's Reserve series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk R600 and Polk R200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk R600 and Polk R200 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R600 and R200 are 2-way speakers.
| Driver |
Polk R600 |
Polk R200 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
1 x 6.5-inch
|
R600 features a 1" Pinnacle Ring Radiator Tweeter and 2 x 6.5" Polypropylene Turbine Cone Woofer with a Crossover frequency at 2700Hz. On the other hand, the R200 features a 1" Pinnacle Ring Radiator Tweeter and 1 x 6.5" Polypropylene Turbine Cone Woofer with a Crossover frequency at 3000Hz.
Frequency Response
R600 has a frequency range of 43-38k Hz whereas R200 has a frequency range of 51-38k Hz. With a minimum frequency of 43Hz, the R600 can go significantly deeper on the low side and provide stronger bass compared to the R200's min frequency of 51Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R600 and R200 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R600 sensitivity is rated at 87.5 dB and the R200's is at 86 dB. This 2 dB difference makes the Polk R600 a more sensitive speaker compared to Polk R200, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R600 features Binding post type posts and R200 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Polk R600's Post terminals
Cabinet Type and Port Position
R600 has a bottom firing port whereas R200 has a rear firing ports. Polk R600's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk R200 with its rear-firing port.
Polk R600 Port
Polk R200 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk R600's and Polk R200's external dimensions. Polk R600 has external dimensions of 1063.8 x 280.7 x 381.6mm ( 41.9 x 11 x 15inch) whereas Polk R200 has external dimensions of 359.0 x 193.0 x 355.0mm ( 14-1/8 x 7-9/16 x 13-15/16inch) .
Polk R600 is clearly the larger of the two speakers. Its body is 87.7mm wider, 704.8mm taller and 26.6mm deeper than Polk R200.
Below you can see the front view size comparison of Polk R600 and Polk R200 in scale.
Comparison image of Polk R600 and Polk R200 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk R600 is approximately 1071.2cm2 / 166.0inch2 and base area of the Polk R200 is approximately 685.2cm2 / 106.2inch2. The R600 requires 56% more surface area than the R200 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Polk R600?
Here are the items that are included inside the box of R600:
Floorstanding loudspeaker
4 Outrigger feet (pre-installed)
4 Rubber feet (pre-installed)
4 Spike feet (pre-installed)
Grille
Hex-key
Owner's Manual
Online Registration
What's in the Box of Polk R200?
Here are the items that come with the R200:
2 Bookshelf loudspeakers2 GrillesOwners ManualOnline Registration