In this review, we will be comparing two different type of speakers by Polk Audio. Polk Audio Reserve R200 50th Anniversary Edition is a Bookshelf speaker whereas the R700 is a Floor-standing speaker.
Let's have a brief look at the main features
of Polk R200 50th AE and Polk R700 first before getting into our more
detailed comparison.
Polk R200 50th AE Key Specs
- 2-way Design
- 1" Ring Radiator Tweeter
- 6.5" Polypropylene Woofer
- 51-38k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-200watts
- Weight:8.80kg
- Dimensions (H x W x D): 358.0" x 7-9/16" x 13-15/16"( 358.0 x 193.0 x 355.0mm )
Polk R700 Key Specs
- 3-way Design
- 1" Pinnacle Ring Radiator Tweeter
- 6.5" Midrange
- 2 x 8" Polypropylene Woofer
- 6.5" Midrange
- 38-38k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-300watts
- Weight:35.90kg
- Dimensions (H x W x D): 1143.8" x 12.6" x 16.9"( 1143.8 x 320.7 x 428.3mm )
R200 50th Anniversary Edition and R700 are members of Polk Audio's Reserve series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk R200 50th AE and Polk R700 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Polk R200 50th AE |
Polk R700 |
| Near-field |
Poor |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk R200 50th AE and Polk R700 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that R200 50th Anniversary Edition is a 2-way design whereas the R700 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Polk R200 50th AE |
Polk R700 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
1 x 6.5-inch
|
2 x 8-inch
|
R200 50th Anniversary Edition features a 1" ring radiator Pinnacle with an integrated waveguide Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer . On the other hand, the R700 features a 1" Pinnacle Ring Radiator Tweeter , a 6.5" Midrange and 2 x 8" Polypropylene Woofer with a Crossover frequency at 350Hz and 2700Hz.
Frequency Response
R200 50th Anniversary Edition has a frequency range of 51-38k Hz whereas R700 has a frequency range of 38-38k Hz. With a minimum frequency of 38Hz, the R700 can go significantly deeper on the low side and provide stronger bass compared to the R200 50th Anniversary Edition's min frequency of 51Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
R200 50th Anniversary Edition
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R200 50th Anniversary Edition and R700 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R200 50th Anniversary Edition sensitivity is rated at 86 dB and the R700's is at 88 dB. This 2 dB difference makes the Polk R700 a more sensitive speaker compared to Polk R200 50th AE, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
R200 50th Anniversary Edition
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
R200 50th Anniversary Edition can handle a max power of 300 watts RMS from the amp the whereas R200 50th Anniversary Edition has a max power handling value of 200 watts RMS , 100 watts less than the R700.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R700 features Post posts which make bi-amping or bi-wiring possible. R200 50th Anniversary Edition has a Binding post which doesn't feature bi-amping/bi-wiring.
Polk R200 50th AE's Binding post terminals
Polk R700's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
R200 50th Anniversary Edition has a rear firing port whereas R700 has a bottom firing ports. Polk R700's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Polk R200 50th AE with its rear-firing port.
Polk R700 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk R200 50th AE's and Polk R700's external dimensions. Polk R200 50th AE has external dimensions of 358.0 x 193.0 x 355.0mm ( 24-28inch x 7-9/16inch x 13-15/16inch ) whereas Polk R700 has external dimensions of 1143.8 x 320.7 x 428.3mm ( 45 x 12.6 x 16.9inch) .
Polk R700 is clearly the larger of the two speakers. Its body is 127.7mm wider, 785.8mm taller and 73.3mm deeper than Polk R200 50th AE.
Below you can see the front view size comparison of Polk R200 50th AE and Polk R700 in scale.
Comparison image of Polk R200 50th AE and Polk R700 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk R200 50th AE is approximately 685.2cm2 / 106.2inch2 and base area of the Polk R700 is approximately 1373.6cm2 / 212.9inch2. The R200 50th Anniversary Edition requires 50% less surface area than the R700 which gives it a small advantage on placement in tight spaces.
What's in the Box of Polk R200 50th AE?
Here are the items that are included inside the box of R200 50th Anniversary Edition:
2 Bookshelf loudspeakers2 GrillesOwners ManualOnline RegistrationCertificate Of Aunthenticity
What's in the Box of Polk R700?
Here are the items that come with the R700:
Floorstanding loudspeaker
4 Outrigger feet (pre-installed)
4 Rubber feet (pre-installed)
4 Spike feet (pre-installed)
Grille
Hex-key
Owner's Manual
Online Registration
Minimum Impedance 
Height 
Base Surface Area 
Price per pair* 
Max Input Power 
Driver Setup 
Sensitivity 
Woofer Size 
Bi-Amping and Bi-Wiring