In this review, we will be comparing SourcePoint 8 and SourcePoint 10, two Passive Bookshelf speakers by MoFi Let's have a brief look at the main features
of MoFi SourcePoint 8 and MoFi SourcePoint 10 first before getting into our more
detailed comparison.
SourcePoint 8 and SourcePoint 10 are members of MoFi's SourcePoint series of speakers. Below you can find the loudspeakers from this series.
MoFi SourcePoint Series History
What size room are the MoFi SourcePoint 8 and MoFi SourcePoint 10 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint 8 and MoFi SourcePoint 10 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both SourcePoint 8 and SourcePoint 10 are 2-way speakers.
| Driver |
MoFi SourcePoint 8 |
MoFi SourcePoint 10 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.25-inch
|
1.25-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 8-inch
|
1 x 10-inch
|
SourcePoint 8 features a 1.25" wide roll soft dome Tweeter and 1 x 8" Paper-pulp Woofer with a Crossover frequency at 1600 Hz. On the other hand, the SourcePoint 10 features a 1.25" wide roll soft dome Tweeter and 1 x 10" Paper-pulp Woofer with a Crossover frequency at 1600 Hz.
Frequency Response
SourcePoint 8 has a frequency range of 47-30k Hz whereas SourcePoint 10 has a frequency range of 42-30k Hz. With a minimum frequency of 42Hz, the SourcePoint 10 can go significantly deeper on the low side and provide stronger bass compared to the SourcePoint 8's min frequency of 47Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint 8 and SourcePoint 10 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. SourcePoint 8 sensitivity is rated at 87dB and the SourcePoint 10's is at 91dB. This 4 dB difference makes the MoFi SourcePoint 10 a more sensitive speaker compared to MoFi SourcePoint 8, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
SourcePoint 8 can handle a max power of 200 watts RMS from the amp the whereas SourcePoint 8 has a max power handling value of 150 watts RMS , 50 watts less than the SourcePoint 10.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
SourcePoint 8 features 5-Way post type posts and SourcePoint 10 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
MoFi SourcePoint 8's 5-Way post terminals
MoFi SourcePoint 10's 5-Way post terminals
Cabinet Type and Port Position
Both SourcePoint 8 and SourcePoint 10 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint 8's and MoFi SourcePoint 10's external dimensions. MoFi SourcePoint 8 has external dimensions of 456 x 290 x 320mm ( 18 x 11.4 x 12.6 inch) whereas MoFi SourcePoint 10 has external dimensions of 572 x 368 x 406mm ( 22.5 x 14.5 x 16 inch) .
MoFi SourcePoint 10 is clearly the larger of the two speakers. Its body is 78mm wider, 116mm taller and 102mm deeper than MoFi SourcePoint 8.
Below you can see the front view size comparison of MoFi SourcePoint 8 and MoFi SourcePoint 10 in scale.
Comparison image of MoFi SourcePoint 8 and MoFi SourcePoint 10 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint 8 is approximately 928.0cm2 / 143.8inch2 and base area of the MoFi SourcePoint 10 is approximately 1552.0cm2 / 240.6inch2. The SourcePoint 8 requires 40% less surface area than the SourcePoint 10 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MoFi SourcePoint 8 weighs 12.70kg / 27.9lbs and the MoFi SourcePoint 10 weighs 21.00kg / 46.2lbs. This makes the SourcePoint 10 65% heavier than the SourcePoint 8.
Here is a comparison of how SourcePoint 8 and SourcePoint 10's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
 Minimum Impedance |
6.4 ohms
vs
6.2 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Height |
456mm
vs
572mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
928cm2 (290x320mm)
vs
1552cm2 (368x422mm)
|
Takes less floor space |
 Price per pair* |
2999USD
vs
3699USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
200 watts
vs
150 watts
|
Handle more power from your amplifier |
 Sensitivity |
91 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
42 Hz
vs
47 Hz
|
Generates deeper bass |
| General |
MoFi SourcePoint 8 |
MoFi SourcePoint 10 |
| Brand |
MoFi |
MoFi |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-150 watts |
30-200 watts |
| Sensitivity |
87dB |
91dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
6.4 ohms |
6.2 ohms |
| Frequency Response |
47-30k Hz |
42-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Paper-pulp |
Paper-pulp |
| Tweeter Size |
1.25" |
1.25" |
| Tweeter Type |
wide roll soft dome |
wide roll soft dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1600 Hz |
1600 Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
456.0mm (18") |
572.0mm (22.5") |
| Width |
290.0mm (11.4") |
368.0mm (14.5") |
| Depth |
320.0mm (12.6") |
422.0mm (16.6") |
| Weight |
12.70kg (27.9lbs) |
21.00kg (46.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
real wood veneer |
real wood veneer |
| Available Colors |
Black, Walnut, Satin White |
Satin Walnut, Satin Black Ash |
| Mounting Bracket |
No |
No |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
|
|
| Labor Warranty |
|
|