In this review, we will be comparing La Scala AL6 and Cornwall IV, two Passive Floor-standing speakers by Klipsch
Let's have a brief look at the main features
of Klipsch La Scala AL6 and Klipsch Cornwall IV first before getting into our more
detailed comparison.
Klipsch La Scala AL6 Key Specs
- 3-way Design
- 1" horn-loaded Tweeter
- 3" Midrange
- 12" fiber-composite cone with folded horn Woofer
- 40-19k Hz Frequency Response
- 103 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:93.00kg
- Dimensions (H x W x D): 994.0" x 24.5" x 25.5"( 994 x 622 x 647mm )
Klipsch Cornwall IV Key Specs
- 3-way Design
- 1" horn-loaded Tweeter
- 1.75" Midrange
- 15" Fiber composite Woofer
- 1.75" Midrange
- 34-20k Hz Frequency Response
- 102 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:44.55kg
- Dimensions (H x W x D): 966.0" x 25-5/16" x 15-1/2"( 966.0 x 643.0 x 394.0mm )
La Scala AL6 and Cornwall IV are members of Klipsch's Heritage series of speakers. Below you can find the loudspeakers from this series.
Klipsch Heritage Series
History
In the following sections, we will get into more detail in order to better understand how the Klipsch La Scala AL6 and Klipsch Cornwall IV compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both La Scala AL6 and Cornwall IV are 3-way speakers.
| Driver |
Klipsch La Scala AL6 |
Klipsch Cornwall IV |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 3-inch |
1 x 1.75-inch |
|
Woofer
|
1 x 12-inch
|
1 x 15-inch
|
La Scala AL6 features a 1" polyimide diaphragm compression horn-loaded Tweeter , a 3" Midrange and 1 x 12" fiber-composite cone with folded horn Woofer with a Crossover frequency at 425Hz - 2900Hz. On the other hand, the Cornwall IV features a 1" titanium-diaphragm compression horn-loaded Tweeter , a 1.75" Midrange and 1 x 15" Fiber composite Woofer .
Frequency Response
La Scala AL6 has a frequency range of 40-19k Hz whereas Cornwall IV has a frequency range of 34-20k Hz. With a minimum frequency of 34Hz, the Cornwall IV can go significantly deeper on the low side and provide stronger bass compared to the La Scala AL6's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
La Scala AL6 and Cornwall IV have the same Impedance of 8 ohms but where they differ is the sensitivity levels. La Scala AL6 sensitivity is rated at 103 dB and the Cornwall IV's is at 102 dB. This 1 dB difference makes the Klipsch La Scala AL6 a more sensitive speaker compared to Klipsch Cornwall IV, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
La Scala AL6 and Cornwall IV has the same power range of up to 100 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both La Scala AL6 and Cornwall IV features dual binding post speaker terminals for bi-amping or bi-wiring.
Klipsch La Scala AL6's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch La Scala AL6's and Klipsch Cornwall IV's external dimensions. Klipsch La Scala AL6 has external dimensions of 994 x 622 x 647mm ( 39/1 x 24.5 x 25.5inch) whereas Klipsch Cornwall IV has external dimensions of 966.0 x 643.0 x 394.0mm ( 38 x 25-5/16 x 15-1/2inch) .
Klipsch Cornwall IV is 28mm shorter and 253mm less deeper than Klipsch La Scala AL6 but it is also 21mm wider.
Below you can see the front view size comparison of Klipsch La Scala AL6 and Klipsch Cornwall IV in scale.
Comparison image of Klipsch La Scala AL6 and Klipsch Cornwall IV Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch La Scala AL6 is approximately 3960.9cm2 / 613.9inch2 and base area of the Klipsch Cornwall IV is approximately 2533.4cm2 / 392.7inch2. The La Scala AL6 requires 56% more surface area than the Cornwall IV which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch La Scala AL6 weighs 93.00kg / 204.6lbs and the Klipsch Cornwall IV weighs 44.55kg / 98lbs. This makes the La Scala AL6 109% heavier than the Cornwall IV.
Here is a comparison of how La Scala AL6 and Cornwall IV's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch La Scala AL6?
Here are the items that are included inside the box of La Scala AL6:
2 Loudspeaker cabinets2 Subwoofer cabinets2 Grilles4 Jumper-straps (pre-installed)Owners ManualCongratulations letterKlipsch brochure
What's in the Box of Klipsch Cornwall IV?
Here are the items that come with the Cornwall IV:
2 Floorstanding loudspeakers2 GrillesOwners ManualCongratulations letterKlipsch brochure
 Sensitivity |
103 dB
vs
102 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
15 inches
vs
12 inches
|
Larger woofer |
|
Low Frequency Response |
34 Hz
vs
40 Hz
|
Generates deeper bass |
 High Frequency Response |
20k Hz
vs
19k Hz
|
Generates higher frequency |
 Height |
966mm
vs
994mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
2533cm2
vs
3960cm2
|
Takes less floor space |
 Price per pair* |
6598USD
vs
14998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Heritage La Scala AL6 |
Klipsch Heritage Cornwall IV |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 100 watts |
up to 100 watts |
| Sensitivity |
103 dB |
102 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.2 ohms |
n/a |
| Frequency Response |
40-19k Hz |
34-20k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
15" |
| Woofer Composition |
fiber-composite cone with folded horn |
Fiber composite |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
horn-loaded |
horn-loaded |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
3" |
1.75" |
| Crossover Frequency |
425Hz - 2900Hz |
n/a |
Physical Specs |
|
|
| Height |
994.0mm (39.1") |
966.0mm (38") |
| Width |
622.0mm (24.5") |
643.0mm (25.3") |
| Depth |
647.0mm (25.5") |
394.0mm (15.5") |
| Weight |
93.00kg (204.6lbs) |
44.55kg (98lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Woof veneer |
MDF/Wood veneer |
| Available Colors |
American Auburn, Black Ash, American Walnut |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
10 Years |
10 Years |
| Labor Warranty |
10 Years |
10 Years |