In this review, we will be comparing La Scala AL6 and Heresy III, two Passive Floor-standing speakers by Klipsch
Let's have a brief look at the main features
of Klipsch La Scala AL6 and Klipsch Heresy III first before getting into our more
detailed comparison.
Klipsch La Scala AL6 Key Specs
- 3-way Design
- 1" horn-loaded Tweeter
- 3" Midrange
- 12" fiber-composite cone with folded horn Woofer
- 40-19k Hz Frequency Response
- 103 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:93.00kg
- Dimensions (H x W x D): 994.0" x 24.5" x 25.5"( 994 x 622 x 647mm )
Klipsch Heresy III Key Specs
- 3-way Design
- 1" Tractrix horn Tweeter
- 1.75" Midrange
- 12" Fiber-composite Woofer
- 1.75" Midrange
- 58-20k Hz Frequency Response
- 99 dB Sensitivity
- Impedance: 8ohms
- Power Range:100watts
- Weight:20.00kg
- Dimensions (H x W x D): 607.0" x 15-1/2" x 13-7/16"( 607.0 x 394.0 x 342.0mm )
La Scala AL6 and Heresy III are members of Klipsch's Heritage series of speakers. Below you can find the loudspeakers from this series.
Klipsch Heritage Series
History
In the following sections, we will get into more detail in order to better understand how the Klipsch La Scala AL6 and Klipsch Heresy III compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both La Scala AL6 and Heresy III are 3-way speakers.
| Driver |
Klipsch La Scala AL6 |
Klipsch Heresy III |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 3-inch |
1 x 1.75-inch |
|
Woofer
|
1 x 12-inch
|
1 x 12-inch
|
La Scala AL6 features a 1" polyimide diaphragm compression horn-loaded Tweeter , a 3" Midrange and 1 x 12" fiber-composite cone with folded horn Woofer with a Crossover frequency at 425Hz - 2900Hz. On the other hand, the Heresy III features a 1" titanium-diaphragm compression Tractrix horn Tweeter , a 1.75" Midrange and 1 x 12" Fiber-composite Woofer .
Frequency Response
La Scala AL6 has a frequency range of 40-19k Hz whereas Heresy III has a frequency range of 58-20k Hz. With a minimum frequency of 40Hz, the La Scala AL6 can go significantly deeper on the low side and provide stronger bass compared to the Heresy III's min frequency of 58Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
La Scala AL6 and Heresy III have the same Impedance of 8 ohms but where they differ is the sensitivity levels. La Scala AL6 sensitivity is rated at 103 dB and the Heresy III's is at 99 dB. This 4 dB difference makes the Klipsch La Scala AL6 a more sensitive speaker compared to Klipsch Heresy III, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both La Scala AL6 and Heresy III features dual binding post speaker terminals for bi-amping or bi-wiring.
Klipsch La Scala AL6's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch La Scala AL6's and Klipsch Heresy III's external dimensions. Klipsch La Scala AL6 has external dimensions of 994 x 622 x 647mm ( 39/1 x 24.5 x 25.5inch) whereas Klipsch Heresy III has external dimensions of 607.0 x 394.0 x 342.0mm ( 23-7/8 x 15-1/2 x 13-7/16inch) .
Klipsch La Scala AL6 is clearly the larger of the two speakers. Its body is 228mm wider, 387mm taller and 305mm deeper than Klipsch Heresy III.
Below you can see the front view size comparison of Klipsch La Scala AL6 and Klipsch Heresy III in scale.
Comparison image of Klipsch La Scala AL6 and Klipsch Heresy III Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch La Scala AL6 is approximately 3960.9cm2 / 613.9inch2 and base area of the Klipsch Heresy III is approximately 1347.5cm2 / 208.9inch2. The La Scala AL6 requires 194% more surface area than the Heresy III which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch La Scala AL6 weighs 93.00kg / 204.6lbs and the Klipsch Heresy III weighs 20.00kg / 44lbs. This makes the La Scala AL6 365% heavier than the Heresy III.
Here is a comparison of how La Scala AL6 and Heresy III's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch La Scala AL6?
Here are the items that are included inside the box of La Scala AL6:
2 Loudspeaker cabinets2 Subwoofer cabinets2 Grilles4 Jumper-straps (pre-installed)Owners ManualCongratulations letterKlipsch brochure
What's in the Box of Klipsch Heresy III?
Here are the items that come with the Heresy III:
Floor-standing loudspeakerDetachable grille (installed)Base riser (installed)4 Self-adhesive rubber feetOwners ManualCongratulations letterKlipsch brochure
 Sensitivity |
103 dB
vs
99 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
40 Hz
vs
58 Hz
|
Generates deeper bass |
 High Frequency Response |
20k Hz
vs
19k Hz
|
Generates higher frequency |
 Height |
607mm
vs
994mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1347cm2
vs
3960cm2
|
Takes less floor space |
 Price per pair* |
2346USD
vs
14998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Heritage La Scala AL6 |
Klipsch Capitol Heresy III |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 100 watts |
100 watts |
| Sensitivity |
103 dB |
99 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.2 ohms |
n/a |
| Frequency Response |
40-19k Hz |
58-20k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
12" |
| Woofer Composition |
fiber-composite cone with folded horn |
Fiber-composite |
| Woofer Surround Material |
Rubber |
Treated cloth |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
horn-loaded |
Tractrix horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
3" |
1.75" |
| Crossover Frequency |
425Hz - 2900Hz |
n/a |
Physical Specs |
|
|
| Height |
994.0mm (39.1") |
607.0mm (23.9") |
| Width |
622.0mm (24.5") |
394.0mm (15.5") |
| Depth |
647.0mm (25.5") |
342.0mm (13.5") |
| Weight |
93.00kg (204.6lbs) |
20.00kg (44lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Finish |
MDF/Woof veneer |
MDF/Wood veneer |
| Available Colors |
American Auburn, Black Ash, American Walnut |
Blonde Cherry |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
10 Years |
5 Years |
| Labor Warranty |
10 Years |
5 Years |