In this review, we will be comparing AK6 and Heresy IV, two Passive Floor-standing speakers by Klipsch Let's have a brief look at the main features
of Klipsch Klipschorn AK6 and Klipsch Heresy IV first before getting into our more
detailed comparison.
AK6 and Heresy IV are members of Klipsch's Heritage series of speakers. Below you can find the loudspeakers from this series.
Klipsch Heritage Series History
In the following sections, we will get into more detail in order to better understand how the Klipsch Klipschorn AK6 and Klipsch Heresy IV compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both AK6 and Heresy IV are 3-way speakers.
| Driver |
Klipsch Klipschorn AK6 |
Klipsch Heresy IV |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 2-inch |
1 x 1.75-inch |
|
Woofer
|
1 x 15-inch
|
1 x 12-inch
|
AK6 features a 1" polyimide diaphragm compression Tractrix horn Tweeter , a 2" Midrange and 1 x 15" fiber-composite with a trihedral exponential folded horn Woofer . On the other hand, the Heresy IV features a 1" titanium-diaphragm compression horn-loaded Tweeter , a 1.75" Midrange and 1 x 12" Fiber-composite Woofer .
Frequency Response
AK6 has a frequency range of 33-20k Hz whereas Heresy IV has a frequency range of 48-20k Hz. With a minimum frequency of 33Hz, the AK6 can go significantly deeper on the low side and provide stronger bass compared to the Heresy IV's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AK6 and Heresy IV have the same Impedance of 8 ohms but where they differ is the sensitivity levels. AK6 sensitivity is rated at 105 dB and the Heresy IV's is at 99 dB. This 6 dB difference makes the Klipsch Klipschorn AK6 a more sensitive speaker compared to Klipsch Heresy IV, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
AK6 and Heresy IV has the same power range of up to 100 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both AK6 and Heresy IV features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch Klipschorn AK6's and Klipsch Heresy IV's external dimensions. Klipsch Klipschorn AK6 has external dimensions of 1347.0 x 794.0 x 718.0mm ( 53 x 31-1/4 x 28-1/4inch) whereas Klipsch Heresy IV has external dimensions of 631.0 x 394.0 x 337.0mm ( 24-13/16 x 15-1/2 x 13-1/4inch) .
Klipsch Klipschorn AK6 is clearly the larger of the two speakers. Its body is 400mm wider, 716mm taller and 381mm deeper than Klipsch Heresy IV.
Below you can see the front view size comparison of Klipsch Klipschorn AK6 and Klipsch Heresy IV in scale.
Comparison image of Klipsch Klipschorn AK6 and Klipsch Heresy IV Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch Klipschorn AK6 is approximately 5700.9cm2 / 883.6inch2 and base area of the Klipsch Heresy IV is approximately 1327.8cm2 / 205.8inch2. The AK6 requires 329% more surface area than the Heresy IV which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch Klipschorn AK6 weighs 100.00kg / 220lbs and the Klipsch Heresy IV weighs 20.45kg / 45lbs. This makes the AK6 389% heavier than the Heresy IV.
Here is a comparison of how AK6 and Heresy IV's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch Klipschorn AK6?
Here are the items that are included inside the box of AK6:
2 Loudspeaker cabinets2 Subwoofer cabinets2 GrillesOwners ManualCongratulations letterKlipsch brochure
What's in the Box of Klipsch Heresy IV?
Here are the items that come with the Heresy IV:
2 Floor-standing loudspeakers2 Detachable grilles (installed)2 Base risers (installed)8 Self-adhesive rubber feet4 Jumper-straps (installed)Owners ManualCongratulations letterKlipsch brochure
 Sensitivity |
105 dB
vs
99 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
15 inches
vs
12 inches
|
Larger woofer |
| Low Frequency Response |
33 Hz
vs
48 Hz
|
Generates deeper bass |
 Height |
631mm
vs
1347mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1327cm2 (394x337mm)
vs
5700cm2 (794x718mm)
|
Takes less floor space |
 Price per pair* |
3198USD
vs
16498USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Heritage Klipschorn AK6 |
Klipsch Heritage Heresy IV |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 100 watts |
up to 100 watts |
| Sensitivity |
105 dB |
99 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
33-20k Hz |
48-20k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
15" |
12" |
| Woofer Composition |
fiber-composite with a trihedral exponential folded horn |
Fiber-composite |
| Woofer Surround Material |
Rubber |
Treated cloth |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Tractrix horn |
horn-loaded |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
2" |
1.75" |
Physical Specs |
|
|
| Height |
1347.0mm (53") |
631.0mm (24.8") |
| Width |
794.0mm (31.3") |
394.0mm (15.5") |
| Depth |
718.0mm (28.3") |
337.0mm (13.3") |
| Weight |
100.00kg (220lbs) |
20.45kg (45lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Wood veneer |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
10 Years |
10 Years |
| Labor Warranty |
10 Years |
10 Years |