In this review, we will be comparing two different types of speakers by Emotiva. Emotiva Airmotiv XT1 is a Floor-standing speaker whereas the Airmotiv XC2 is a Center Channel speaker.
Let's have a brief look at the main features
of Emotiva Airmotiv XT1 and Emotiva Airmotiv XC2 first before getting into our more
detailed comparison.
| Key Specs | Emotiva Airmotiv XT1 | Emotiva Airmotiv XC2 |
|---|
| Brand | Emotiva
United States · founded 2003 | Emotiva
United States · founded 2003 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 25×32 mm" folded ribbon | 25×32 mm" folded ribbon |
|---|
| Midrange | 4.5" | 5.25" |
|---|
| Woofer | 3 x 5.25" woven fiber cone | 2 x 6" woven fiber cone |
|---|
| Frequency response | 45 Hz – 27 kHz | 40 Hz – 27 kHz |
|---|
| Sensitivity | 89 dB | 89 dB |
|---|
| Impedance | 4 ohms | 4 ohms |
|---|
| Power range | Up to 200 watts | Up to 150 watts |
|---|
| Weight | 15.90kg / 35lbs | 16.80kg / 37lbs |
|---|
| Dimensions (H x W x D) | 41.75" x 8.75" x 10"
1060.0 x 222.0 x 254.0mm | 8.5" x 31.5" x 10.25"
216 x 800 x 260 mm |
|---|
Airmotiv XT1 and Airmotiv XC2 are members of Emotiva's Airmotiv X series of speakers. Below you can find the loudspeakers from this series.
Emotiva Airmotiv X Series
History
What size room are the Emotiva Airmotiv XT1 and Emotiva Airmotiv XC2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Emotiva Airmotiv XT1 |
Emotiva Airmotiv XC2 |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Airmotiv XT1 and Airmotiv XC2 are 3-way speakers.
Emotiva Airmotiv XT1Emotiva Airmotiv XC2
MidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Emotiva Airmotiv XT1 |
Emotiva Airmotiv XC2 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
25×32 mm-inch
|
25×32 mm-inch
|
|
Midrange
|
1 x 4.5-inch |
1 x 5.25-inch |
|
Woofer
|
3 x 5.25-inch
|
2 x 6-inch
|
Airmotiv XT1 features a 25×32 mm" folded ribbon Tweeter, a 4.5" Midrange and 3 x 5.25" woven fiber cone Woofer with a Crossover frequency at 410 Hz, 3.1 kHz. On the other hand, the Airmotiv XC2 features a 25×32 mm" folded ribbon Tweeter, a 5.25" Midrange and 2 x 6" woven fiber cone Woofer with a Crossover frequency at 600 Hz, 3.1 kHz.
Frequency Response
Airmotiv XT1 has a frequency range of 45 Hz – 27 kHz whereas Airmotiv XC2 has a frequency range of 40 Hz – 27 kHz. With a minimum frequency of 40Hz, the Airmotiv XC2 can go significantly deeper on the low side and provide stronger bass compared to the Airmotiv XT1's min frequency of 45Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv XT1 and Airmotiv XC2 have the same Impedance of 4 ohms and their sensitivity is also same at 89 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Airmotiv XT1 and the Airmotiv XT1 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Airmotiv XT1 can handle a max power of 200 watts RMS, whereas Airmotiv XC2 has a max power handling value of 150 watts RMS, 50 watts less than the Airmotiv XT1.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both Airmotiv XT1 and Airmotiv XC2 features dual binding post speaker terminals for bi-amping or bi-wiring.
Emotiva Airmotiv XT1's Binding post terminals allows Bi-amping or bi-wiring
Emotiva Airmotiv XC2's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Airmotiv XT1 and Airmotiv XC2 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv XT1's and Emotiva Airmotiv XC2's external dimensions. Emotiva Airmotiv XT1 has external dimensions of 1060.0 x 222.0 x 254.0mm (41.75” x 7” x 10”) whereas Emotiva Airmotiv XC2 has external dimensions of 216 x 800 x 260 mm (8.5” x 31.5” x 10.25”).
Emotiva Airmotiv XT1 is 578mm narrower and 6mm less deeper than Emotiva Airmotiv XC2 but it is also 844mm taller.
Below you can see the front view size comparison of Emotiva Airmotiv XT1 and Emotiva Airmotiv XC2 in scale.
Comparison image of Emotiva Airmotiv XT1 and Emotiva Airmotiv XC2 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv XT1 is approximately 563.9cm2 / 87.4inch2 and base area of the Emotiva Airmotiv XC2 is approximately 2080.0cm2 / 322.4inch2. The Airmotiv XT1 requires 73% less surface area than the Airmotiv XC2 which gives it a small advantage on placement in tight spaces.