In this review, we will be comparing two different type of speakers by Emotiva. Emotiva Airmotiv XT1 is a Floor-standing speaker whereas the Airmotiv XC1 is a Center Channel speaker.
Let's have a brief look at the main features
of Emotiva Airmotiv XT1 and Emotiva Airmotiv XC1 first before getting into our more
detailed comparison.
Airmotiv XT1 and Airmotiv XC1 are members of Emotiva's Airmotiv X series of speakers. Below you can find the loudspeakers from this series.
Emotiva Airmotiv X Series History
What size room are the Emotiva Airmotiv XT1 and Emotiva Airmotiv XC1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv XT1 and Emotiva Airmotiv XC1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv XT1 and Airmotiv XC1 are 3-way speakers.
| Driver |
Emotiva Airmotiv XT1 |
Emotiva Airmotiv XC1 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
25×32 mm-inch
|
25×32 mm-inch
|
|
Midrange
|
1 x 4.5-inch |
1 x 4.5-inch |
|
Woofer
|
3 x 5.25-inch
|
2 x 5.25-inch
|
Airmotiv XT1 features a 25×32 mm" folded ribbon Tweeter , a 4.5" Midrange and 3 x 5.25" woven fiber cone Woofer with a Crossover frequency at 410 Hz, 3.1 kHz. On the other hand, the Airmotiv XC1 features a 25×32 mm" folded ribbon Tweeter , a 4.5" Midrange and 2 x 5.25" woven fiber cone Woofer with a Crossover frequency at 620 Hz, 3.1 kHz.
Frequency Response
Airmotiv XT1 has a frequency range of 45 Hz – 27 kHz whereas Airmotiv XC1 has a frequency range of 50 Hz – 27 kHz. With a minimum frequency of 45Hz, the Airmotiv XT1 can go significantly deeper on the low side and provide stronger bass compared to the Airmotiv XC1's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv XT1 and Airmotiv XC1 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Airmotiv XT1 sensitivity is rated at 89 dB and the Airmotiv XC1's is at 88 dB. This 1 dB difference makes the Emotiva Airmotiv XT1 a more sensitive speaker compared to Emotiva Airmotiv XC1, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Airmotiv XT1 and the Airmotiv XT1 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv XT1 can handle a max power of 200 watts RMS from the amp the whereas Airmotiv XC1 has a max power handling value of 120 watts RMS, 80 watts less than the Airmotiv XT1.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Airmotiv XT1 and Airmotiv XC1 features dual binding post speaker terminals for bi-amping or bi-wiring.
Emotiva Airmotiv XT1's Binding post terminals allows Bi-amping or bi-wiring
Emotiva Airmotiv XC1's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Airmotiv XT1 and Airmotiv XC1 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv XT1's and Emotiva Airmotiv XC1's external dimensions. Emotiva Airmotiv XT1 has external dimensions of 106 x 178 x 254 mm ( 41.75” x 7” x 10”) whereas Emotiva Airmotiv XC1 has external dimensions of 190 x 660 x 241 mm ( 7.5” x 26” x 9.5”) .
Emotiva Airmotiv XC1 is 870mm shorter and 13mm less deeper than Emotiva Airmotiv XT1 but it is also 438mm wider.
Below you can see the front view size comparison of Emotiva Airmotiv XT1 and Emotiva Airmotiv XC1 in scale.
Comparison image of Emotiva Airmotiv XT1 and Emotiva Airmotiv XC1 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv XT1 is approximately 452.1cm2 / 70.1inch2 and base area of the Emotiva Airmotiv XC1 is approximately 1590.6cm2 / 246.5inch2. The Airmotiv XT1 requires 72% less surface area than the Airmotiv XC1 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Emotiva Airmotiv XT1 weighs 15.90kg / 35lbs and the Emotiva Airmotiv XC1 weighs 11.30kg / 24.9lbs. This makes the Airmotiv XT1 41% heavier than the Airmotiv XC1.
Here is a comparison of how Airmotiv XT1 and Airmotiv XC1's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
 Max Input Power |
200 watts
vs
120 watts
|
Handle more power from your amplifier |
 Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Number of Woofers |
3
vs
2
|
More woofers |
| Low Frequency Response |
45 Hz
vs
50 Hz
|
Generates deeper bass |
 Base Surface Area |
452cm2 (222x254mm)
vs
1590cm2 (660x241mm)
|
Takes less floor space |
 Height |
190mm
vs
1060mm
|
Easier to fit in smaller spaces |
 Price per pair* |
399USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Emotiva Airmotiv XT1 |
Emotiva Airmotiv XC1 |
| Brand |
Emotiva |
Emotiva |
| Speaker Type |
Floor-standing speaker |
Center channel speaker |
| Power Range |
Up to 200 watts |
Up to 120 watts |
| Sensitivity |
89 dB |
88 dB |
| Impedance |
4 ohms |
4 ohms |
| Frequency Response |
45 Hz – 27 kHz |
50 Hz – 27 kHz |
Drivers |
|
|
| Woofer Quantity |
3 |
2 |
| Woofer Size |
5.25" |
5.25" |
| Woofer Composition |
woven fiber cone |
woven fiber cone |
| Woofer Surround Material |
SBR |
SBR |
| Tweeter Size |
25×32 mm" |
25×32 mm" |
| Tweeter Type |
folded ribbon |
folded ribbon |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
4.5" |
4.5" |
| Crossover Frequency |
410 Hz, 3.1 kHz |
620 Hz, 3.1 kHz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1060.0mm (41.7") |
190.0mm (7.5") |
| Width |
222.0mm (8.7") |
660.0mm (26") |
| Depth |
254.0mm (10") |
241.0mm (9.5") |
| Weight |
15.90kg (35lbs) |
11.30kg (24.9lbs) |
| Enclosure |
Bass reflex |
Bass reflex |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |