In this review, we will be comparing Airmotiv T1+ and Airmotiv T2+, two Passive Floor-standing speakers by Emotiva Let's have a brief look at the main features
of Emotiva Airmotiv T1+ and Emotiva Airmotiv T2+ first before getting into our more
detailed comparison.
Airmotiv T1+ and Airmotiv T2+ are members of Emotiva's Airmotiv series of speakers. Below you can find the loudspeakers from this series.
Emotiva Airmotiv Series History
What size room are the Emotiva Airmotiv T1+ and Emotiva Airmotiv T2+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv T1+ and Emotiva Airmotiv T2+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv T1+ and Airmotiv T2+ are 3-way speakers.
| Driver |
Emotiva Airmotiv T1+ |
Emotiva Airmotiv T2+ |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
25×32 mm-inch
|
25×32 mm-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 5.25-inch |
|
Woofer
|
2 x 6-inch
|
2 x 8-inch
|
Airmotiv T1+ features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 2 x 6" woven fiber cone Woofer with a Crossover frequency at 275 Hz and 2700Hz. On the other hand, the Airmotiv T2+ features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 2 x 8" woven fiber cone Woofer with a Crossover frequency at 350 Hz and 3200Hz.
Frequency Response
Airmotiv T1+ has a frequency range of 37 Hz – 28 kHz whereas Airmotiv T2+ has a frequency range of 35 Hz – 28 kHz. With a minimum frequency of 35Hz, the Airmotiv T2+ can go slightly deeper then the Airmotiv T1+'s min frequency of 37Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv T1+ and Airmotiv T2+ have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Airmotiv T1+ sensitivity is rated at 88 dB and the Airmotiv T2+'s is at 91 dB. This 3 dB difference makes the Emotiva Airmotiv T2+ a more sensitive speaker compared to Emotiva Airmotiv T1+, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Airmotiv T1+ and the Airmotiv T1+ can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv T1+ can handle a max power of 200 watts RMS from the amp the whereas Airmotiv T1+ has a max power handling value of 150 watts RMS , 50 watts less than the Airmotiv T2+.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Airmotiv T1+ and Airmotiv T2+ features dual binding post speaker terminals for bi-amping or bi-wiring.
Emotiva Airmotiv T1+'s Binding post terminals allows Bi-amping or bi-wiring
Emotiva Airmotiv T2+'s Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Airmotiv T1+ and Airmotiv T2+ have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Emotiva Airmotiv T1+ Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv T1+'s and Emotiva Airmotiv T2+'s external dimensions. Emotiva Airmotiv T1+ has external dimensions of 1004.0 x 213.0 x 296.0mm ( 39-1/2 x 8-3/8 x 11-5/8inch) whereas Emotiva Airmotiv T2+ has external dimensions of 1085.0 x 310.0 x 439.0mm ( 42-11/16 x 12-3/16 x 17-1/4inch) .
Emotiva Airmotiv T2+ is clearly the larger of the two speakers. Its body is 97mm wider, 81mm taller and 143mm deeper than Emotiva Airmotiv T1+.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv T1+ is approximately 630.5cm2 / 97.7inch2 and base area of the Emotiva Airmotiv T2+ is approximately 1360.9cm2 / 210.9inch2. The Airmotiv T1+ requires 54% less surface area than the Airmotiv T2+ which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Emotiva Airmotiv T1+ weighs 18.20kg / 40lbs and the Emotiva Airmotiv T2+ weighs 25.90kg / 57lbs. This makes the Airmotiv T2+ 42% heavier than the Airmotiv T1+.
Here is a comparison of how Airmotiv T1+ and Airmotiv T2+'s weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
 Height |
1004mm
vs
1085mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
630cm2 (213x296mm)
vs
1360cm2 (310x439mm)
|
Takes less floor space |
 Price per pair* |
799USD
vs
1099USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
200 watts
vs
150 watts
|
Handle more power from your amplifier |
 Sensitivity |
91 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
8 inches
vs
6 inches
|
Larger woofer |
| Low Frequency Response |
35 Hz
vs
37 Hz
|
Generates deeper bass |
| General |
Emotiva Airmotiv T1+ |
Emotiva Airmotiv T2+ |
| Brand |
Emotiva |
Emotiva |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
Up to 150 watts |
Up to 200 watts |
| Sensitivity |
88 dB |
91 dB |
| Impedance |
4 ohms |
4 ohms |
| Frequency Response |
37 Hz – 28 kHz |
35 Hz – 28 kHz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
8" |
| Woofer Composition |
woven fiber cone |
woven fiber cone |
| Tweeter Size |
25×32 mm" |
25×32 mm" |
| Tweeter Type |
folded ribbon |
folded ribbon |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
5.25" |
| Crossover Frequency |
275 Hz and 2700Hz |
350 Hz and 3200Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1004.0mm (39.5") |
1085.0mm (42.7") |
| Width |
213.0mm (8.4") |
310.0mm (12.2") |
| Depth |
296.0mm (11.7") |
439.0mm (17.3") |
| Weight |
18.20kg (40lbs) |
25.90kg (57lbs) |
| Enclosure |
Bass reflex |
Bass reflex |
| Finish |
HDF |
HDF |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |