In this review, we will be comparing two different type of speakers by Emotiva. Emotiva Airmotiv T1+ is a Floor-standing speaker whereas the Airmotiv C1+ is a Center Channel speaker.
Let's have a brief look at the main features
of Emotiva Airmotiv T1+ and Emotiva Airmotiv C1+ first before getting into our more
detailed comparison.
Emotiva Airmotiv T1+ Key Specs
- 3-way Design
- 25×32 mm" folded ribbon Tweeter
- 5.25" Midrange
- 2 x 6" woven fiber cone Woofer
- 37 Hz – 28 kHz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 150watts
- Weight:18.20kg
- Dimensions (H x W x D): 1004.0" x 8-3/8" x 11-5/8"( 1004.0 x 213.0 x 296.0mm )
Emotiva Airmotiv C1+ Key Specs
- 3-way Design
- 25×32 mm" folded ribbon Tweeter
- 3" Midrange
- 2 x 5.25" woven fiber cone Woofer
- 3" Midrange
- 50 Hz – 28 kHz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 120watts
- Weight:8.45kg
- Dimensions (H x W x D): 197.0" x 20-1/2" x 8-1/4"( 197.0 x 521.0 x 210.0mm )
Airmotiv T1+ and Airmotiv C1+ are members of Emotiva's Airmotiv series of speakers. Below you can find the loudspeakers from this series.
Emotiva Airmotiv Series History
What size room are the Emotiva Airmotiv T1+ and Emotiva Airmotiv C1+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Emotiva Airmotiv T1+ |
Emotiva Airmotiv C1+ |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv T1+ and Emotiva Airmotiv C1+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv T1+ and Airmotiv C1+ are 3-way speakers.
| Driver |
Emotiva Airmotiv T1+ |
Emotiva Airmotiv C1+ |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
25×32 mm-inch
|
25×32 mm-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 3-inch |
|
Woofer
|
2 x 6-inch
|
2 x 5.25-inch
|
Airmotiv T1+ features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 2 x 6" woven fiber cone Woofer with a Crossover frequency at 275 Hz and 2700Hz. On the other hand, the Airmotiv C1+ features a 25×32 mm" folded ribbon Tweeter , a 3" Midrange and 2 x 5.25" woven fiber cone Woofer with a Crossover frequency at 550 Hz and 2600Hz.
Frequency Response
Airmotiv T1+ has a frequency range of 37 Hz – 28 kHz whereas Airmotiv C1+ has a frequency range of 50 Hz – 28 kHz. With a minimum frequency of 37Hz, the Airmotiv T1+ can go significantly deeper on the low side and provide stronger bass compared to the Airmotiv C1+'s min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv T1+ and Airmotiv C1+ have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Airmotiv T1+ sensitivity is rated at 88 dB and the Airmotiv C1+'s is at 89 dB. This 1 dB difference makes the Emotiva Airmotiv C1+ a more sensitive speaker compared to Emotiva Airmotiv T1+, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Airmotiv T1+ and the Airmotiv T1+ can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv T1+ can handle a max power of 150 watts RMS from the amp the whereas Airmotiv C1+ has a max power handling value of 120 watts RMS, 30 watts less than the Airmotiv T1+.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Airmotiv T1+ and Airmotiv C1+ features dual binding post speaker terminals for bi-amping or bi-wiring.
Emotiva Airmotiv T1+'s Binding post terminals allows Bi-amping or bi-wiring
Emotiva Airmotiv C1+'s Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Airmotiv T1+ and Airmotiv C1+ have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Emotiva Airmotiv T1+ Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv T1+'s and Emotiva Airmotiv C1+'s external dimensions. Emotiva Airmotiv T1+ has external dimensions of 1004.0 x 213.0 x 296.0mm ( 39-1/2 x 8-3/8 x 11-5/8inch) whereas Emotiva Airmotiv C1+ has external dimensions of 197.0 x 521.0 x 210.0mm ( 7-3/4 x 20-1/2 x 8-1/4inch) .
Emotiva Airmotiv C1+ is 807mm shorter and 86mm less deeper than Emotiva Airmotiv T1+ but it is also 308mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv T1+ is approximately 630.5cm2 / 97.7inch2 and base area of the Emotiva Airmotiv C1+ is approximately 1094.1cm2 / 169.6inch2. The Airmotiv T1+ requires 42% less surface area than the Airmotiv C1+ which gives it a small advantage on placement in tight spaces.
Max Input Power 
Woofer Size 
Base Surface Area 
Sensitivity 
Height 
Price per pair*