In this review, we will be comparing two different types of speakers by Acoustic Energy. Acoustic Energy AE300 Mark II is a Bookshelf speaker whereas the AE320 Mark II is a Floor-standing speaker.
Let's have a brief look at the main features
of AE300 Mark II and AE320 Mark II first before getting into our more
detailed comparison.
| Key Specs | AE300 Mark II | AE320 Mark II |
|---|
| Brand | Acoustic Energy United Kingdom · founded 1987 | Acoustic Energy United Kingdom · founded 1987 |
|---|
| Design | 2-way | 3-way |
|---|
| Tweeter | 1.1" Dome | 1.1" Dome |
|---|
| Midrange | — | 5" |
|---|
| Woofer | 5" paper cone | 2 x 6.5" paper/coconut-fibre cone |
|---|
| Frequency response | 42-29k Hz | 30-29k Hz |
|---|
| Sensitivity | 86 dB | 92 dB |
|---|
| Impedance | 6 ohms | 6 ohms |
|---|
| Power range | up to 120 watts | up to 200 watts |
|---|
| Weight | 7.00kg / 15.4lbs | 26.00kg / 57.2lbs |
|---|
| Dimensions (H x W x D) | 12.6" x 6.7" x 10.6" 320.0 x 170.0 x 270.0mm | 41.3" x 7.9" x 13.8" 1050.0 x 200.0 x 350.0mm |
|---|
AE300 Mark II and AE320 Mark II are members of Acoustic Energy's AE300 Mark II series of speakers. Below you can find the loudspeakers from this series.
What size room are the AE300 Mark II and AE320 Mark II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
AE300 Mark II |
AE320 Mark II |
| Near-field |
Average |
Bad |
| Small Room |
Good |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Good |
| Very Large Room |
Bad |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that AE300 Mark II is a 2-way design whereas the AE320 Mark II is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
AE300 Mark IIAE320 Mark II
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
AE300 Mark II |
AE320 Mark II |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
1 x 5-inch
|
2 x 6.5-inch
|
AE300 Mark II features a 1.1" fabric Dome Tweeter and 1 x 5" paper cone Woofer with a Crossover frequency at 3.5kHz. On the other hand, the AE320 Mark II features a 1.1" fabric Dome Tweeter, a 5" Midrange and 2 x 6.5" paper/coconut-fibre cone Woofer with a Crossover frequency at 240Hz and 2.8kHz.
Frequency Response
AE300 Mark II has a frequency range of 42-29k Hz whereas AE320 Mark II has a frequency range of 30-29k Hz. With a minimum frequency of 30Hz, the AE320 Mark II can go significantly deeper on the low side and provide stronger bass compared to the AE300 Mark II's min frequency of 42Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE300 Mark II and AE320 Mark II have the same Impedance of 6 ohms but where they differ is the sensitivity levels. AE300 Mark II sensitivity is rated at 86 dB and the AE320 Mark II's is at 92 dB. This 6 dB difference makes the AE320 Mark II a more sensitive speaker compared to AE300 Mark II, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
AE320 Mark II can handle a max power of 200 watts RMS, whereas AE300 Mark II has a max power handling value of 120 watts RMS, 80 watts less than the AE320 Mark II.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Cabinet Type and Port Position
Both AE300 Mark II and AE320 Mark II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE300 Mark II's and AE320 Mark II's external dimensions. AE300 Mark II has external dimensions of 320.0 x 170.0 x 270.0mm (12.6 x 6.7 x 10.6inch) whereas AE320 Mark II has external dimensions of 1050.0 x 200.0 x 350.0mm (41.3 x 7.9 x 13.8inch).
AE320 Mark II is clearly the larger of the two speakers. Its body is 30mm wider, 730mm taller and 80mm deeper than AE300 Mark II.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
AE320 Mark II needs about 53% more floor or shelf area. AE320 Mark II is 80mm deeper, so it stands that much further out from the wall. AE320 Mark II is 730mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE300 Mark II is approximately 459.0cm2 / 71.1inch2 and base area of the AE320 Mark II is approximately 700.0cm2 / 108.5inch2. The AE300 Mark II requires 34% less surface area than the AE320 Mark II which gives it a small advantage on placement in tight spaces.