One is a streaming all-in-one and the other is an amplifier. Judge them on how many boxes you want and what you already own, not on the spec sheet alone.
| Area | Better | Why |
|---|
| Power | B | Audiolab 7000A has more power - 70W against 40W into 8 ohms. That is about 2.4dB, so it plays usefully louder before it runs out and has more in hand on peaks. |
| Room size | depends | We rate ELAC DS-A101-G the better fit for desk or near-field listening and a small room, and Audiolab 7000A for a mid-size room, a large room and a very large room. Match the amplifier to the room you actually have, not the one you want. |
| Grip on hard loads | A | ELAC DS-A101-G holds up better into a 4-ohm load: its output nearly doubles to 80W, where the other increases strongly. That matters with demanding speakers far more than the 8-ohm figure does. |
| Noise floor | B | Audiolab 7000A is the quieter design on paper - 110dB against 101dB. Audible mainly with sensitive speakers in a quiet room. |
| Built-in DAC | B | Both decode on board, but only Audiolab 7000A handles DSD and MQA. |
| Streaming | evenly matched | Only ELAC DS-A101-G has Roon. Neither list is longer in a way that matters - check the one service you actually pay for. |
| Analogue inputs | B | Audiolab 7000A takes more analogue sources - 3 against 2. |
| Phono stage | depends | Audiolab 7000A has a built-in phono stage (MM) and ELAC DS-A101-G does not. Decisive if you own a turntable, completely irrelevant if you do not - and an outboard phono stage is easy to add later either way. |
| Room to grow | B | Only Audiolab 7000A offers a pre-out/main-in loop - which decides whether you can add a subwoofer or a power amplifier later without replacing the box. |
| Headphones | depends | Only Audiolab 7000A has a headphone output. Worth something if you listen late, nothing if you never do. |
| Shelf space | depends | ELAC DS-A101-G takes up about 51% less shelf area (746cm² against 1510cm²). |
| Price | A | ELAC DS-A101-G costs less - $850 against $999 at list. |
| Watts per dollar | B | Audiolab 7000A is the cheaper watt - about $14 per watt against $21. A blunt measure, and it says nothing about how either sounds, but it is the honest one for raw output. |
A ELAC DS-A101-G B Audiolab 7000A
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Audiolab 7000A leads across most of the measured areas for a fairly modest premium, so it is the easier pick if the budget stretches. ELAC DS-A101-G is the one to take if it does not. If your speakers are a difficult load - 4 ohms nominal, big woofers, or a sensitivity in the low 80s - ELAC DS-A101-G is the safer partner, because how an amplifier behaves when the impedance drops matters more than its 8-ohm rating. Start with the room. In a large or open-plan room, or with speakers that are hard to drive - low sensitivity, or an impedance that dips - Audiolab 7000A has the headroom, and headroom is what stops an amplifier hardening up on peaks. At desk distance or in a small room, 40 watts is already more than most people ever use, and the extra 30 watts would be headroom you pay for and never hear - we rate Audiolab 7000A poorly for near-field use for exactly that reason.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.