Power needed
24–150 W
per channel, into 8 ohms
To hit 95 dB peaks at 3 m from a pair of SVS Prime Satellite, you need at least 24 W a channel. More than 150 W is wasted here — that is all SVS rates the speaker to take.
Show the working
- 95 dB target at the seat
- +4.8 dB for 3.0 m of distance
- -3 dB for a stereo pair
- -83.0 dB effective sensitivity
- 2 dB allowed for optimistic published sensitivity
- Published sensitivity 85 dB, used as 83.0 dB per watt.
Sony STR-DH190 with the SVS Prime Satellite
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean.
This amplifier does not publish a minimum impedance. An 8 ohm speaker is a safe bet even so.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Full Sony STR-DH190 specs
·
Clear this amp
174 integrated amplifiers suit the SVS Prime Satellite
Also show the 2 we do not recommend
1
Excellent match
6 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 3 ohms, comfortable with an 8 ohm speaker that dips to 3.2.
Power nearly doubles into 4 ohms (100 W to 200 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
2
Good match
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (200 W to 400 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
3
Good match
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (125 W to 250 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
4
Good match
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
Power nearly doubles into 4 ohms (125 W to 250 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
5
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean.
This amplifier does not publish a minimum impedance. An 8 ohm speaker is a safe bet even so.
Power nearly doubles into 4 ohms (100 W to 200 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
6
Workable with care
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (125 W to 250 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
7
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean.
This amplifier does not publish a minimum impedance. An 8 ohm speaker is a safe bet even so.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Balanced against the price of the speakers.
8
Good match
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Far more expensive than the speakers. Spend it on speakers first.
9
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean.
This amplifier does not publish a minimum impedance. An 8 ohm speaker is a safe bet even so.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Balanced against the price of the speakers.
10
Workable with care
4 dB of headroom - enough, but at the modest end for this speaker, which takes up to 150 W.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (60 W to 120 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
11
Workable with care
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (150 W to 300 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
12
Workable with care
8 dB of headroom over what this speaker needs - peaks stay clean.
This amplifier does not publish a minimum impedance. An 8 ohm speaker is a safe bet even so.
Power nearly doubles into 4 ohms (150 W to 300 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
13
Workable with care
8 dB of headroom over what this speaker needs - peaks stay clean.
This amplifier does not publish a minimum impedance. An 8 ohm speaker is a safe bet even so.
Power nearly doubles into 4 ohms (150 W to 300 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
14
Workable with care
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (125 W to 250 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
15
Workable
6 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Far more expensive than the speakers. Spend it on speakers first.
16
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (100 W to 200 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
17
Workable with care
6 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (100 W to 200 W) - a stiff supply that copes with hard loads.
Costs more than the speakers - worth it only if you plan to upgrade them later.
18
Workable with care
4 dB of headroom - enough, but at the modest end for this speaker, which takes up to 150 W.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (60 W to 120 W) - a stiff supply that copes with hard loads.
Balanced against the price of the speakers.
19
Workable with care
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (200 W to 380 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
20
Workable with care
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
Power nearly doubles into 4 ohms (200 W to 380 W) - a stiff supply that copes with hard loads.
Far more expensive than the speakers. Spend it on speakers first.
Showing the best 20 of 174. Narrow it with the price range below, or a different budget split.
18 power amplifiers that would also drive them
Listed separately because they are not a complete system: a power amplifier has no volume control and no inputs to speak of, so you need a preamplifier or a streaming preamp as well. Worth it if you already own one, or if you want to buy the two halves separately.
1
Good match
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Far more expensive than the speakers. Spend it on speakers first.
2
Good match
10 dB of headroom over what this speaker needs - peaks stay clean.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Far more expensive than the speakers. Spend it on speakers first.
3
Workable with care
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
No current price on file for this amplifier.
4
Workable with care
12 dB of headroom, far more than needed. No harm in it. Well above the 150 W the maker rates the speaker for, so keep an eye on the volume knob.
Rated down to 2 ohms - stable into anything this speaker will throw at it.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Far more expensive than the speakers. Spend it on speakers first.
5
Workable with care
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 6 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Costs more than the speakers - worth it only if you plan to upgrade them later.
6
Workable with care
8 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Far more expensive than the speakers. Spend it on speakers first.
7
Workable with care
7 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Far more expensive than the speakers. Spend it on speakers first.
8
Workable with care
9 dB of headroom over what this speaker needs - peaks stay clean.
Rated to 4 ohms, but this speaker dips to 3.2. Fine at sane volume, tight if you push it hard.
No 4 ohm power rating on file. On a 8 ohm speaker dipping to 3.2 that is the figure that matters, so this one is unproven on the load.
Far more expensive than the speakers. Spend it on speakers first.
Were these amplifier recommendations useful?
It helps us tune the matching, and we read every comment.
Thanks. Anything you would add?
Optional, and it goes straight to the person who maintains this page.
Thanks — noted.
Sensitivity and impedance figures are the manufacturer's own. We read sensitivity as dB at 2.83 V/1 m and take 2 dB off it, because published figures run high. Treat the result as a well-founded starting point, not a measurement. Full SVS Prime Satellite specs.