Perlisten R5i LR In Wall is a 3-way Passive Bass Reflex In-wall speaker by Perlisten. It was released in 2022. It features a Tweeter and x " Woofer. Perlisten lists the drivers as DPC-Array with three 26mm silk dome drivers, two 165mm HPF diaphragms. The speaker has a frequency range of 40-32k Hz and a sensitivity of 89.4 dB. Perlisten R5i LR In Wall has an MSRP of 6590$ per pair.
Room Size Suitability
The size of the room where you plan to use the Perlisten R5i LR In Wall is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Frequency Response of the Perlisten R5i LR In Wall Speaker
Perlisten R5i LR In Wall has a Frequency response range of 40-32k Hz and Power Range of 50–250W RMS SPL Capability (100–20kHz) 113.4 dB peak, 111.0 dB peak with less than 3% distortion Mounting Depth 4.0 inches (101.7mm) watts. With a minimum frequency of 40 Hz, R5i LR In Wall delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how R5i LR In Wall's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
In-wall Speakers
Thinking about a subwoofer for the Perlisten R5i LR In Wall?
Impedance and Sensitivity
Perlisten R5i LR In Wall's nominal impedance level is
4 ohms and has a sensitivity of
89.4 dB.
Sensitivity
In-wall Speakers
Nominal Impedance of the 4 Ohms means that the Perlisten R5i LR In Wall is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Perlisten R5i LR In Wall with an AVR but use an Integrated Amplifier instead.
Sensitivity
89dB of the Perlisten R5i LR In Wall is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Perlisten R5i LR In Wall plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Perlisten R5i LR In Wall need?
At normal listening levels in a medium room, about
19–250 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
R5i LR In Wall features Binding post type connectors.
Work out what gauge speaker cable this run needs →
Perlisten R5i LR In Wall External Dimensions and Weight
Perlisten R5i LR In Wall has external dimensions of (Height x Width x Depth) 26.2 x 11.8 x 4.4inch (665.5 x 299.7 x 111.8mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Perlisten R5i LR In Wall is approximately 335.0cm2 / 51.9inch2.
Find speakers that fit your shelf or alcove →
Cabinet type and Materials
Perlisten R5i LR In Wall has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Perlisten R5i LR In Wall come with a Grille?
R5i LR In Wall comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Perlisten R5i LR In Wall.
Official Product Page
Official manufacturer's product page for the Perlisten R5i LR In Wall speaker can be found below:
Official Product Page for Perlisten R5i LR In Wall