Perlisten R4i-LCRS In-Wall is a 3-way Passive Bass Reflex In-wall speaker by Perlisten. It was released in 2023. It features a Tweeter and x " Woofer.
1x 165mm HPF cone
The speaker has a frequency range of 46-37k Hz and a sensitivity of 88.8 dB. Perlisten R4i-LCRS In-Wall has an MSRP of 5390$ per pair.
Room Size Suitability
The size of the room where you plan to use the Perlisten R4i-LCRS In-Wall is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Perlisten R4i-LCRS In-Wall Speaker
Perlisten R4i-LCRS In-Wall has a Frequency response range of 46-37k Hz at ±3dB and Power Range of 50 - 200W RMS watts. With a minimum frequency of 46 Hz, R4i-LCRS In-Wall delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Here we have a comparison of how R4i-LCRS In-Wall's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
In-wall Speakers
Perlisten R4i-LCRS In-Wall
Thinking about a subwoofer for the Perlisten R4i-LCRS In-Wall?
Impedance and Sensitivity
Perlisten R4i-LCRS In-Wall's nominal impedance level is
4 ohms but can go down to as low as
3.3 ohms, and has a sensitivity of
88.8 dB.
Sensitivity
In-wall Speakers
Perlisten R4i-LCRS In-Wall
Nominal Impedance of the 4 Ohms means that the Perlisten R4i-LCRS In-Wall is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Perlisten R4i-LCRS In-Wall with an AVR but use an Integrated Amplifier instead.
Sensitivity
89dB of the Perlisten R4i-LCRS In-Wall is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Perlisten R4i-LCRS In-Wall plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the Perlisten R4i-LCRS In-Wall
Even though the nominal impedance of the R4i-LCRS In-Wall is 4 ohms, the minimum impedance level of this speaker according to Perlisten is 3.3 ohms Perlisten R4i-LCRS In-Wall so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Perlisten R4i-LCRS In-Wall need?
At normal listening levels in a medium room, about
19–200 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
R4i-LCRS In-Wall features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Perlisten R4i-LCRS In-Wall External Dimensions and Weight
Perlisten R4i-LCRS In-Wall has external dimensions of (Height x Width x Depth) 18.86 x 11.73 x 4.37inch (479.0 x 297.9 x 111.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Perlisten R4i-LCRS In-Wall is approximately 330.7cm2 / 51.3inch2.
Find speakers that fit your shelf or alcove →
Cabinet type and Materials
Perlisten R4i-LCRS In-Wall has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Perlisten R4i-LCRS In-Wall come with a Grille?
R4i-LCRS In-Wall comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Perlisten R4i-LCRS In-Wall.
Official Product Page
Official manufacturer's product page for the Perlisten R4i-LCRS In-Wall speaker can be found below:
Official Product Page for Perlisten R4i-LCRS In-Wall