Perlisten R2ic In-Ceiling is a 3-way Passive Bass Reflex In-wall speaker by Perlisten. It was released in 2023. It features a Tweeter and x " Woofer.
165mm Alum frame, HPF pulp
The speaker has a frequency range of 44-27k Hz and a sensitivity of 86 dB. Perlisten R2ic In-Ceiling has an MSRP of 2990$ per pair.
Room Size Suitability
The size of the room where you plan to use the Perlisten R2ic In-Ceiling is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Perlisten R2ic In-Ceiling Speaker
Perlisten R2ic In-Ceiling has a Frequency response range of 44-27k Hz at ±3dB and Power Range of 50 - 150W (with 80Hz HPF) 50 - 100W (full range) watts. With a minimum frequency of 44 Hz, R2ic In-Ceiling delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how R2ic In-Ceiling's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
In-wall Speakers
Perlisten R2ic In-Ceiling
Thinking about a subwoofer for the Perlisten R2ic In-Ceiling?
Impedance and Sensitivity
Perlisten R2ic In-Ceiling's nominal impedance level is
6 ohms but can go down to as low as
3.6 ohms, and has a sensitivity of
86 dB.
Sensitivity
In-wall Speakers
Perlisten R2ic In-Ceiling
Nominal Impedance of the 6 Ohms makes the Perlisten R2ic In-Ceiling a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 86 dB, Perlisten R2ic In-Ceiling is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Perlisten R2ic In-Ceiling plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the Perlisten R2ic In-Ceiling
Even though the nominal impedance of the R2ic In-Ceiling is 6 ohms, the minimum impedance level of this speaker according to Perlisten is 3.6 ohms Perlisten R2ic In-Ceiling so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Perlisten R2ic In-Ceiling need?
At normal listening levels in a medium room, about
25–150 W
per channel into 6 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $3,000, or every amplifier we cover.
Input Type
R2ic In-Ceiling features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Perlisten R2ic In-Ceiling External Dimensions and Weight
Perlisten R2ic In-Ceiling has external dimensions of (Height x Width x Depth) .
Cabinet type and Materials
Perlisten R2ic In-Ceiling has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Perlisten R2ic In-Ceiling come with a Grille?
R2ic In-Ceiling comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Perlisten R2ic In-Ceiling.
Official Product Page
Official manufacturer's product page for the Perlisten R2ic In-Ceiling speaker can be found below:
Official Product Page for Perlisten R2ic In-Ceiling