Monitor Audio Bronze 200 is a 2-way Passive Bass Reflex Floor-standing speaker by Monitor Audio. It was released in 2020. It features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 5.25" C-CAM Woofer. The speaker has a frequency range of 35-30k Hz and a sensitivity of 88 dB. Monitor Audio Bronze 200 has an MSRP of 1150$ per pair.
Bronze 200 also gives the user optional Dolby Atmos capability by equipping the unit with upward-firing Dolby Atmos drivers.
Room Size Suitability
The size of the room where you plan to use the Monitor Audio Bronze 200 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Monitor Audio's Bronze Series of Loudspeakers
Bronze 200 is a member of Monitor Audio's Bronze series of Passive speakers. Bronze is Monitor Audio's entry-level range, popular affordable British speakers with C-CAM metal-cone drivers. Below you can see the main specs of these speakers.
See all 10 Monitor Audio Bronze models compared »
Monitor Audio Bronze Series Speakers
Monitor Audio Bronze Series Speakers
Frequency Response of the Monitor Audio Bronze 200 Speaker
Monitor Audio Bronze 200 has a Frequency response range of 35-30k Hz and Power Range of 40-120 watts. With a minimum frequency of 35 Hz, Bronze 200 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Bronze 200's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Monitor Audio Bronze 200?
Among the speakers in our database with a max MSRP price of 1500$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Monitor Audio Bronze 200's 35Hz:
Impedance and Sensitivity
Monitor Audio Bronze 200's nominal impedance level is
8 ohms and has a sensitivity of
88 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Monitor Audio Bronze 200 is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
88dB of the Monitor Audio Bronze 200 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Monitor Audio Bronze 200 plays in your room →
What amplifier does the Monitor Audio Bronze 200 need?
At normal listening levels in a medium room, about
12–120 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $1,500, or every amplifier we cover.
Input Type
Bronze 200 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Monitor Audio Bronze 200 External Dimensions and Weight
Monitor Audio Bronze 200 has external dimensions of (Height x Width x Depth) 36 x 9 x 12-1/8inch (915.0 x 229.0 x 308.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Monitor Audio Bronze 200 is approximately 705.3cm2 / 109.3inch2.
To get a better perspective on the real life size of Monitor Audio Bronze 200, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Monitor Audio Bronze 200 Speaker Size Compared to a Compact Disc
Here we place the Monitor Audio Bronze 200 virtually next to a standard width amplifier and turntable on a media center to get a better idea about the size.
Monitor Audio Bronze 200 Floor-standing Speaker next to a Media Stand
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Monitor Audio Bronze 200 weighs 12.84kg / 28.2lbs per piece. Here is a comparison of how Bronze 200's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $1500
Cabinet type and Materials
Monitor Audio Bronze 200 has a
Bass Reflex type cabinet and a MDF/Vinyl finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Speaker Feet
Monitor Audio Bronze 200 comes with the parts below which you can use to secure your loudspeaker on the surface that you are putting on:
- 4 Outrigger feet (w/ 4 adjustment dials and locking-nuts)
- 4 Spikes (pre-installed on outrigger feet)
- 4 Rubber feet
It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
Available colors
Monitor Audio Bronze 200 is available in Black.
Does the Monitor Audio Bronze 200 come with a Grille?
Bronze 200 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
What's in the Box of Monitor Audio Bronze 200?
Here are the items that are included inside the box of Bronze 200:
- Floorstanding loudspeaker
- Grille
- 4 Outrigger feet (w/ 4 adjustment dials and locking-nuts)
- 4 Spikes (pre-installed on outrigger feet)
- 4 Rubber feet
- 4 Large course-thread screws
- 4 Small machine screws
- 2 Terminal-jumpers (pre-installed)
- 2 Foam port plugs
- Hex-key
- Quick Start Guide
- Important Safety Instructions
Recommended Accessories
Here is a list of accessories that we think you may need for the Monitor Audio Bronze 200.
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.