MartinLogan Motion 35XTi is a 2-way Passive Bass Reflex Bookshelf speaker by MartinLogan. It was released in 2018. It features a 1.25 x 2.4" Folded Motion XT Tweeter and 1 x 6.5" Aluminum Woofer. The speaker has a frequency range of 50-25k Hz and a sensitivity of 92 dB. MartinLogan 35XTi has an MSRP of 1500$ per pair but can often be found around 1200$ per pair.
Room Size Suitability
The size of the room where you plan to use the MartinLogan 35XTi is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
MartinLogan 35XTi Lifestyle
MartinLogan's Motion Series of Loudspeakers
Motion 35XTi is a member of MartinLogan's Motion series of Passive speakers. The Motion range are MartinLogan's popular speakers using the brand's Folded Motion tweeter in conventional cabinets. Below you can see the main specs of these speakers.
See all 10 MartinLogan Motion models compared »
MartinLogan Motion Series Speakers
MartinLogan Motion Series Speakers
Frequency Response of the MartinLogan 35XTi Speaker
MartinLogan 35XTi has a Frequency response range of 50-25k Hz and Power Range of 20-250 watts. With a minimum frequency of 50 Hz, Motion 35XTi delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Here we have a comparison of how Motion 35XTi's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the MartinLogan 35XTi?
MartinLogan 35XTi's Folded Motion XT Tweeter
Crossover frequency of the MartinLogan 35XTi?
The crossover frequency of the Motion 35XTi is set to 2200Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
MartinLogan 35XTi Crossover is set to 2200Hz
Impedance and Sensitivity
MartinLogan 35XTi's nominal impedance level is
4 ohms and has a sensitivity of
92 dB.
Sensitivity
Bookshelf Speakers
Nominal Impedance of the 4 Ohms means that the MartinLogan Motion 35XTi is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the MartinLogan Motion 35XTi with an AVR but use an Integrated Amplifier instead.
Sensitivity
92dB of the MartinLogan Motion 35XTi is considered a high sensitivity compared to average stereo speaker which makes Motion 35XTi an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the MartinLogan 35XTi will be a good choice. Work out how loud the MartinLogan 35XTi plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the MartinLogan 35XTi need?
At normal listening levels in a medium room, about
9.5–150 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $1,500, or every amplifier we cover.
Input Type
Motion 35XTi has Custom 5-way bi-wire tool-less binding posts type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
MartinLogan 35XTi Back View
MartinLogan 35XTi's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Recommended Break In
Allow 72 hours of break-in at 90 dB.
MartinLogan 35XTi External Dimensions and Weight
MartinLogan 35XTi has external dimensions of (Height x Width x Depth) 13.5 x 7.5 x 11.8inch (343.0 x 192.0 x 300.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of MartinLogan 35XTi is approximately 576.0cm2 / 89.3inch2.
To get a better perspective on the real life size of MartinLogan 35XTi, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
MartinLogan 35XTi Speaker Size Compared to a Compact Disc
Here we place the MartinLogan 35XTi virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.
MartinLogan 35XTi Speaker next to an amplifier and turntable
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe MartinLogan 35XTi weighs 8.40kg / 18.5lbs per piece. Here is a comparison of how Motion 35XTi's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $1500
Cabinet type and Materials
MartinLogan 35XTi has a
Bass Reflex type cabinet and a MDF/Lacquer finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
MartinLogan 35XTi - Side View
Speaker Feet
MartinLogan 35XTi comes with 4 Rubber feet which you can use to secure your loudspeaker on the surface that you are putting on.
It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
Port Position
MartinLogan 35XTi is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
MartinLogan 35XTi is available in Gloss Black, Matt White and Red Walnut.
MartinLogan 35XTi Colors
Wall Mounting
Motion 35XTi doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the MartinLogan 35XTi come with a Grille?
Motion 35XTi comes with magnetic grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the Motion 35XTi is magnetic type, it is very easy to put it on and off.
MartinLogan 35XTi with Grille
What's in the Box of MartinLogan 35XTi?
Here are the items that are included inside the box of Motion 35XTi:
- Bookshelf loudspeaker
- Grille
- 4 Rubber feet
- 2 Jumper-straps (pre-installed)
- Users Manual
- Warranty/Registration Information
Recommended Accessories
Here is a list of accessories that we think you may need for the MartinLogan Motion 35XTi.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
User's Manual
For more information about how to setup, use and maintain the MartinLogan Motion 35XTi, use the direct link below to download the official manual document:
Download User Manual for MartinLogan 35XTi
Official Brochure
Here is a link to download the official brochure for the MartinLogan Motion 35XTi speaker:
Official Brochure for MartinLogan 35XTi
Official Product Page
Official manufacturer's product page for the MartinLogan Motion 35XTi speaker can be found below:
Official Product Page for MartinLogan 35XTi
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.