Klipsch Reference R-41M is a 2-way Passive Bass Reflex Bookshelf speaker by Klipsch. It was released in 2018. It features a 1" Tractrix Horn Tweeter and 1 x 4" Copper-spun IMG Woofer. The speaker has a frequency range of 68-21k Hz and a sensitivity of 90 dB. Klipsch R-41M has an MSRP of 229$ per pair but can often be found around 189$ per pair.
Room Size Suitability
The size of the room where you plan to use the Klipsch R-41M is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Klipsch's Reference (R) Bookshelf Series of Loudspeakers
R-41M is a member of Klipsch's Reference (R) Bookshelf series of Passive speakers. These are the bookshelf models in Klipsch's affordable Reference (R) range, with horn-loaded tweeters for dynamic sound. Below you can see the main specs of these speakers.
Klipsch Reference (R) Bookshelf Series Speakers
Frequency Response of the Klipsch R-41M Speaker
Klipsch R-41M has a Frequency response range of 68-21k Hz and Power Range of 50 watts. With a minimum frequency of 68 Hz, it is hard to expect a strong bass response from R-41M so depending on your use case, using a subwoofer will significantly help to widen the response range.
Here we have a comparison of how R-41M's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the Klipsch R-41M?
Crossover frequency of the Klipsch R-41M?
The crossover frequency of the R-41M is set to 1730Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch R-41M's nominal impedance level is
8 ohms and has a sensitivity of
90 dB.
Sensitivity
Bookshelf Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Klipsch Reference R-41M is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
90dB of the Klipsch Reference R-41M is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Klipsch R-41M plays in your room →
What amplifier does the Klipsch R-41M need?
At normal listening levels in a medium room, about
7.5–50 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $300, or every amplifier we cover.
Input Type
R-41M features Single Gold Plated Binding Posts type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Klipsch R-41M Back View
Klipsch R-41M External Dimensions and Weight
Klipsch R-41M has external dimensions of (Height x Width x Depth) 11.2 x 5.7 x 7.8inch (287.0 x 146.0 x 200.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch R-41M is approximately 292.0cm2 / 45.3inch2.
To get a better perspective on the real life size of Klipsch R-41M, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Klipsch R-41M Speaker Size Compared to a Compact Disc
Here we place the Klipsch R-41M virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.
Klipsch R-41M Speaker next to an amplifier and turntable
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Klipsch R-41M weighs 3.20kg / 7lbs per piece. Here is a comparison of how R-41M's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $300
How does the Klipsch R-41M compare to the Klipsch Reference R-51M?
One of the natural alternative to the Klipsch R-41M is the R-51M which is located one step higher in Klipsch's Passive Bookshelf selection.
Here is a scaled size comparison of these two speakers to give you an idea how their external dimensions compare:
Comparison image of Klipsch R-41M and Klipsch R-51M Size and External Dimensions
Check the Detailed Comparison of Klipsch R-41M vs R-51M for more details.
Cabinet type and Materials
Klipsch R-41M has a
Bass Reflex type cabinet and a MDF/Wood-grain vinyl finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Speaker Feet
Klipsch R-41M comes with 8 Self-adhesive rubber feet which you can use to secure your loudspeaker on the surface that you are putting on.
It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
Port Position
Klipsch R-41M is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
Klipsch R-41M is available in Black.
Wall Mounting
R-41M has Keyhole mounting bracket that makes it possible to mount on walls and similar surfaces easily.
Does the Klipsch R-41M come with a Grille?
R-41M comes with magnetic grilles in black color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the R-41M is magnetic type, it is very easy to put it on and off.
Klipsch R-41M with Grille
What's in the Box of Klipsch R-41M?
Here are the items that are included inside the box of R-41M:
- 2 Bookshelf loudspeakers
- 2 Grilles (installed)
- 8 Self-adhesive rubber feet
- Quick Setup Guide
- Important Safety Instructions
- Warranty Information
Recommended Accessories
Here is a list of accessories that we think you may need for the Klipsch Reference R-41M.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
User's Manual
For more information about how to setup, use and maintain the Klipsch Reference R-41M, use the direct link below to download the official manual document:
Download User Manual for Klipsch R-41M
Official Brochure
Here is a link to download the official brochure for the Klipsch Reference R-41M speaker:
Official Brochure for Klipsch R-41M
Official Product Page
Official manufacturer's product page for the Klipsch Reference R-41M speaker can be found below:
Official Product Page for Klipsch R-41M
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.