GoldenEar T66 is a 3-way Passive Floor-standing speaker by GoldenEar. It was released in 2023. It features a Folded Ribbon Tweeter, 2 x 4.5" Midrange and 2 x 5 x 9" Woofer. The speaker has a frequency range of 29-25k Hz and a sensitivity of 91 dB.
GoldenEar's Triton Series of Loudspeakers
T66 is a member of GoldenEar's Triton series of Passive speakers. The Triton Tower Speakers are GoldenEar Technology's premiere products embodying all of
GoldenEar's cutting edge technology. Below you can see the main specs of these speakers.
See all 7 GoldenEar Triton models compared »
GoldenEar Triton Series Speakers
Frequency Response of the GoldenEar T66 Speaker
GoldenEar T66 has a Frequency response range of 29-25k Hz. With a minimum frequency of 29 Hz, T66 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how T66's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the GoldenEar T66?
Impedance and Sensitivity
GoldenEar T66's nominal impedance level is
4 ohms and has a sensitivity of
91 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the GoldenEar T66 is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the GoldenEar T66 with an AVR but use an Integrated Amplifier instead.
Sensitivity
91dB of the GoldenEar T66 is considered a high sensitivity compared to average stereo speaker which makes T66 an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the GoldenEar T66 will be a good choice. Work out how loud the GoldenEar T66 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the GoldenEar T66 need?
At normal listening levels in a medium room, about
12–190 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $3,000, or every amplifier we cover.
Input Type
T66 features Binding post type connectors.
Work out what gauge speaker cable this run needs →
GoldenEar T66 External Dimensions and Weight
GoldenEar T66 has external dimensions of (Height x Width x Depth) (1255.7 x 300.0 x 431.8mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of GoldenEar T66 is approximately 1295.4cm2 / 200.8inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe GoldenEar T66 weighs 27.22kg / 59.9lbs per piece. Here is a comparison of how T66's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Available colors
GoldenEar T66 is available in Gloss Black.
Recommended Accessories
Here is a list of accessories that we think you may need for the GoldenEar T66.
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.