Fyne Audio FA302iC is a 2-way Passive In-wall In-wall speaker by Fyne Audio. It was released in 2021. It features a Tweeter and x 8" Woofer. Fyne Audio lists the drivers as Mid/Bass: 1 x 8" (200 mm) multi-fiber High: FyneFlute surround with 25 mm polyester dome. The speaker has a frequency range of 37-28k Hz and a sensitivity of 90 dB. Fyne Audio FA302iC has an MSRP of 419$.
Room Size Suitability
The size of the room where you plan to use the Fyne Audio FA302iC is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Frequency Response of the Fyne Audio FA302iC Speaker
Fyne Audio FA302iC has a Frequency response range of 37-28k Hz and Power Range of 25 - 120 W watts. With a minimum frequency of 37 Hz, FA302iC delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how FA302iC's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
In-wall Speakers
Thinking about a subwoofer for the Fyne Audio FA302iC?
Crossover frequency of the Fyne Audio FA302iC?
The crossover frequency of the FA302iC is set to 2800 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Fyne Audio FA302iC's nominal impedance level is
8 ohms and has a sensitivity of
90 dB.
Sensitivity
In-wall Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Fyne Audio FA302iC is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
90dB of the Fyne Audio FA302iC is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Fyne Audio FA302iC plays in your room →
What amplifier does the Fyne Audio FA302iC need?
At normal listening levels in a medium room, about
7.5–120 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $500, or every amplifier we cover.
Input Type
FA302iC features Binding post type connectors.
Work out what gauge speaker cable this run needs →
Fyne Audio FA302iC External Dimensions and Weight
Fyne Audio FA302iC has external dimensions of (Height x Width x Depth) (273.0 x 273.0 x 115.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Fyne Audio FA302iC is approximately 314.0cm2 / 48.7inch2.
Find speakers that fit your shelf or alcove →
Cabinet type and Materials
Fyne Audio FA302iC has a
In-wall type cabinet.
Does the Fyne Audio FA302iC come with a Grille?
FA302iC comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Fyne Audio FA302iC.
Official Product Page
Official manufacturer's product page for the Fyne Audio FA302iC speaker can be found below:
Official Product Page for Fyne Audio FA302iC