Fyne Audio FA301iC is a 2-way Passive In-wall In-wall speaker by Fyne Audio. It was released in 2023. It features a Tweeter and x " Woofer.
Mid/Bass: 1 x 6" (150 mm) multi-fiber High: FyneFlute surround with 25 mm polyester dome
The speaker has a sensitivity of 89 dB. Fyne Audio FA301iC has an MSRP of 300$.
Room Size Suitability
The size of the room where you plan to use the Fyne Audio FA301iC is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Fyne Audio FA301iC Speaker
Fyne Audio FA301iC has a Frequency response range of at ±3dB. With a minimum frequency of Hz, FA301iC delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how FA301iC's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
In-wall Speakers
Thinking about a subwoofer for the Fyne Audio FA301iC?
Crossover frequency of the Fyne Audio FA301iC?
The crossover frequency of the FA301iC is set to 3200 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Fyne Audio FA301iC's nominal impedance level is
8 ohms and has a sensitivity of
89 dB.
Sensitivity
In-wall Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Fyne Audio FA301iC is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
89dB of the Fyne Audio FA301iC is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Fyne Audio FA301iC plays in your room →
What amplifier does the Fyne Audio FA301iC need?
At normal listening levels in a medium room, about
9.5–150 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $300, or every amplifier we cover.
Input Type
FA301iC features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Fyne Audio FA301iC External Dimensions and Weight
Fyne Audio FA301iC has external dimensions of (Height x Width x Depth) .
Cabinet type and Materials
Fyne Audio FA301iC has a
In-wall type cabinet.
Does the Fyne Audio FA301iC come with a Grille?
FA301iC comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Fyne Audio FA301iC.
Official Product Page
Official manufacturer's product page for the Fyne Audio FA301iC speaker can be found below:
Official Product Page for Fyne Audio FA301iC