Dynaudio Focus 30 XD is a 3-way Powered Bass Reflex Floor-standing speaker by Dynaudio. It was released in 2021. Focus 30 XD's built-in amplifier provides 450-watt RMS. The built-in power amplifier saves space & eliminates the need to connect Dynaudio Focus 30 XD to a stereo receiver or external power amp. It features a 1.1" Soft-Dome Tweeter and 2 x 6.5" MSP Woofer.
An active 2.5-way floorstander: 2 x 6.5 inch MSP mid/bass drivers and the 28 mm Soft dome tweeter, crossed in DSP, with 450 W of onboard amplification. 29 Hz to 24 kHz. Focus XD is the active, DSP-crossed range: an amplifier per driver and a wireless link between the two cabinets.
The speaker has a frequency range of 29-24k Hz.
Dynaudio's Focus XD Series of Loudspeakers
Focus 30 XD is a member of Dynaudio's Focus XD series of Powered speakers. Below you can see the main specs of these speakers.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Dynaudio Focus 30 XD Speaker
Dynaudio Focus 30 XD has a Frequency response range of 29-24k Hz at ±3dB and Power Range of up to 450 watts. With a minimum frequency of 29 Hz, Focus 30 XD delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Focus 30 XD's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Crossover frequency of the Dynaudio Focus 30 XD?
Focus 30 XD is a 3-way speaker and its crossover frequency between the woofer and the midrange set to Hz and the Crossover frequency between the midrange and the tweeter is set to Hz.
Inputs and Outputs
- USB Port:
- Subwoofer Output
- Digital Input:
- HDMI Input:
- Headphone Jack:
- Ethernet Port
Dynaudio Focus 30 XD External Dimensions and Weight
Dynaudio Focus 30 XD has external dimensions of (Height x Width x Depth) 38-9/16 x 7-13/16 x 12-1/16inch (980.0 x 198.0 x 307.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Dynaudio Focus 30 XD is approximately 607.9cm2 / 94.2inch2.
WeightThe Dynaudio Focus 30 XD weighs 18.50kg / 40.7lbs per piece. Here is a comparison of how Focus 30 XD's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Cabinet type and Materials
Dynaudio Focus 30 XD has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Dynaudio Focus 30 XD is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Does the Dynaudio Focus 30 XD come with a Grille?
Focus 30 XD comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Dynaudio Focus 30 XD.
Official Product Page
Official manufacturer's product page for the Dynaudio Focus 30 XD speaker can be found below:
Official Product Page for Dynaudio Focus 30 XD