Definitive Technology DT8LCR is a 2-way Passive In-wall In-wall speaker by Definitive Technology. It was released in 2016. It features a 1" Hard-Dome Tweeter and 1 x 8" Polypropylene Woofer. The speaker has a frequency range of 27-30kHz and a sensitivity of 89 dB. Definitive DT8LCR has an MSRP of 558$ per pair.
Room Size Suitability
The size of the room where you plan to use the Definitive DT8LCR is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Definitive Technology's DT Series of Loudspeakers
DT8LCR is a member of Definitive Technology's DT series of Passive speakers. The DT range is Definitive Technology's affordable custom-install speaker line. Below you can see the main specs of these speakers.
Definitive Technology DT Series Speakers
Frequency Response of the Definitive DT8LCR Speaker
Definitive DT8LCR has a Frequency response range of 27-30kHz and Power Range of 10-100 watts. With a minimum frequency of 27 Hz, DT8LCR delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how DT8LCR's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
In-wall Speakers
Thinking about a subwoofer for the Definitive DT8LCR?
Impedance and Sensitivity
Definitive DT8LCR's nominal impedance level is
8 ohms and has a sensitivity of
89 dB.
Sensitivity
In-wall Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Definitive Technology DT8LCR is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
89dB of the Definitive Technology DT8LCR is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Definitive DT8LCR plays in your room →
What amplifier does the Definitive DT8LCR need?
At normal listening levels in a medium room, about
9.5–100 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $750, or every amplifier we cover.
Input Type
DT8LCR features Spring post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Definitive DT8LCR External Dimensions and Weight
Definitive DT8LCR has external dimensions of (Height x Width x Depth) 12.7500-inch x 8.7500-inch x 3.7500-inch (324.0 x 223.0 x 96.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Definitive DT8LCR is approximately 214.1cm2 / 33.2inch2.
Find speakers that fit your shelf or alcove →
Cabinet type and Materials
Definitive DT8LCR has a
In-wall type cabinet.
What's in the Box of Definitive DT8LCR?
Here are the items that are included inside the box of DT8LCR:
- In-wall loudspeaker
- Grille
- Mounting template
- Carboard paint shield
- Owners Guide
- Online Product Registration Information
- Important Installation Instructions
Recommended Accessories
Here is a list of accessories that we think you may need for the Definitive Technology DT8LCR.
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.