DALI Sonik On-Wall is a 2-way Passive Bass Reflex On-wall speaker by DALI. It was released in 2024. It features a 1.14" Soft-Dome Tweeter and 1 x 5.25" Wood fibre Woofer.
DALI publishes the driver complement as: 1 x 5¼ inch low/mid, 1 x 29 mm low loss soft dome high frequency.
The speaker has a frequency range of 55-26k Hz and a sensitivity of 87 dB.
DALI's Sonik Series of Loudspeakers
Sonik On-Wall is a member of DALI's Sonik series of Passive speakers. SONIK is DALI's latest entry-level range, replacing Oberon and bringing the brand's SMC magnet system and a new low-mass soft-dome tweeter to an affordable price. Below you can see the main specs of these speakers.
See all 7 DALI Sonik models compared »
DALI Sonik Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the DALI Sonik On-Wall Speaker
DALI Sonik On-Wall has a Frequency response range of 55-26k Hz at ±0.0dB and Power Range of 25-100 watts. With a minimum frequency of 55 Hz, Sonik On-Wall delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Sonik On-Wall's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
On-wall Speakers
High Frequency
On-wall Speakers
Crossover frequency of the DALI Sonik On-Wall?
The Crossover frequency of the Sonik On-Wall is set to 2400Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
DALI Sonik On-Wall's nominal impedance level is
6 ohms and has a sensitivity of
87 dB.
Sensitivity
On-wall Speakers
Nominal Impedance of the 6 Ohms makes the DALI Sonik On-Wall a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 87 dB, DALI Sonik On-Wall is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps.
Browse all integrated amplifiers
Input Type
Sonik On-Wall features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
DALI Sonik On-Wall External Dimensions and Weight
DALI Sonik On-Wall has external dimensions of (Height x Width x Depth) .
Weight
All On-wall Speakers
Cabinet type and Materials
DALI Sonik On-Wall has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the DALI Sonik On-Wall come with a Grille?
Sonik On-Wall comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the DALI Sonik On-Wall.
Official Product Page
Official manufacturer's product page for the DALI Sonik On-Wall speaker can be found below:
Official Product Page for DALI Sonik On-Wall
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.